The fact that you are hooked up to 20 meters of cable is very promising. If I want to have some flexibility with my antenna installation and get it in the right spot I need to use close to 30 meters. I wonder how that will work out if I use something like LMR400 http://www.timesmicrowave.com/content/pdf/lmr/22-25.pdf.
There is also another cable in the US called BuryFlex from DavisRF www.davisrf.com that is recommended.
Regards,
Falcon
Hi Falcon,
The LMR cable you suggest looks very good...the range of connectors is comprehensive and the install tools would make an easy job of prepping the cable and fitting the plugs.
Not sure where you are based although you do mention US suppliers so I guess you are based somewhere in Obama-Land...
If you were in the UK I can personally vouch for WH Westlake and their Westflex 103 cable which carries similar specs to the LMR-400.
I have no association with the Company apart from being a satisfied customer.
They are fast & knowledgable and seem to carry lots of stock especially those hard-to-find adaptors you can't seem to find elsewhere.
Ordered an N Type Socket->BNC Socket adaptor Friday afternoon and it was on my doorstep Saturday morning...excellent service.
I personally use 20m Westflex 103 with N Type connectors - one of which I had to fit myself as those muppets at Wally & Standoff fitted a PL259 to one end...OK for a lowly CB radio but never intended for 1090MHz...
WH Westlake also supply another cable - Andrews LDF-4-50a which seems to offer half the loss of the W103/LMR-400.
http://www.whwestlake.co.ukThere is also a very useful loss calculator at the bottom of the page which compares the different types.
I am considering moving to the Andrews cable myself and using my existing Westflex for Royal Discone/receiver duties...
Food for thought maybe?
BTW I feel your pain with regard to the freezing menu problem that you posted about - I never noticed the thread until after it had been locked...
I am probably one of the longest suffering users with regard to that and other related issues...
Kind regards,
-=Glyn=-