AirNav RadarBox
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
 


« previous next »
Pages: [1] 2 3

Author Topic: Feeding AIRNAV without a raspberry pie  (Read 23458 times)

0 Members and 2 Guests are viewing this topic.

upperfi

  • New Member
  • *
  • Posts: 21
Feeding AIRNAV without a raspberry pie
« on: June 02, 2019, 04:47:06 PM »
Hello! I just picked up a radarbox usb receiver. Everywhere I read it seems like the only way to feed data to radarbox is with a raspberry pie. Currently I have a dedicated R210II server in my server room running virtual box. I was thinking of spinning up a new virtual machine with windows and feed that way. Is there an issue with this?

Thanks!
Logged

Runway 31

  • Moderator
  • Hero Member
  • *****
  • Posts: 34069
Re: Feeding AIRNAV without a raspberry pie
« Reply #1 on: June 02, 2019, 04:54:50 PM »
Hi

There is not problems using a USB stick with windows to feed RB24 and I don't foresee any issues doing what you suggest.

Use the V6 software with the stick http://www.airnavsystems.com/download/ANRB/ANRB60002Setup.exe  and the drivers for it http://www.airnavsystems.com/Download/ANRB/Drivers/microRadarbox-Drivers-20150411.exe

Alan
Logged

upperfi

  • New Member
  • *
  • Posts: 21
Re: Feeding AIRNAV without a raspberry pie
« Reply #2 on: June 02, 2019, 04:59:57 PM »
awesome.. Thank you!
Logged

abcd567

  • Hero Member
  • *****
  • Posts: 890
  • CYYZ - Toronto
Re: Feeding AIRNAV without a raspberry pie
« Reply #3 on: June 03, 2019, 12:14:05 AM »
See screenshots below. Feeding Radarbox24 with FlightStick + Windows Computer + ARNB 6.02

Logged

upperfi

  • New Member
  • *
  • Posts: 21
Re: Feeding AIRNAV without a raspberry pie
« Reply #4 on: June 04, 2019, 12:03:31 PM »
I've been trying to get this to work for the last two days. I've installed the drivers and radarbox software to C:/airnav My flightstick lights up white. But in the radarbox program its shows a red box and says hardware not connected... hmmm.
Logged

upperfi

  • New Member
  • *
  • Posts: 21
Re: Feeding AIRNAV without a raspberry pie
« Reply #5 on: June 04, 2019, 04:38:01 PM »
I wonder if I can boot this on a ubuntu VM instead.
Logged

Runway 31

  • Moderator
  • Hero Member
  • *****
  • Posts: 34069
Re: Feeding AIRNAV without a raspberry pie
« Reply #6 on: June 04, 2019, 07:30:45 PM »
Contact [email protected]

Alan
Logged

upperfi

  • New Member
  • *
  • Posts: 21
Re: Feeding AIRNAV without a raspberry pie
« Reply #7 on: June 05, 2019, 11:51:27 PM »
Quote from: abcd567 on June 03, 2019, 12:14:05 AM
See screenshots below. Feeding Radarbox24 with FlightStick + Windows Computer + ARNB 6.02

are you running windows 10? I have tried this many different ways. But I just keep getting No hardware detected on radar box :(
Logged

abcd567

  • Hero Member
  • *****
  • Posts: 890
  • CYYZ - Toronto
Re: Feeding AIRNAV without a raspberry pie
« Reply #8 on: June 06, 2019, 02:34:43 AM »
Quote from: upperfi on June 05, 2019, 11:51:27 PM
are you running windows 10? I have tried this many different ways. But I just keep getting No hardware detected on radar box :(
No. I am using Windows 8.1
Logged

upperfi

  • New Member
  • *
  • Posts: 21
Re: Feeding AIRNAV without a raspberry pie
« Reply #9 on: June 06, 2019, 11:56:21 AM »
Quote from: abcd567 on June 06, 2019, 02:34:43 AM
Quote from: upperfi on June 05, 2019, 11:51:27 PM
are you running windows 10? I have tried this many different ways. But I just keep getting No hardware detected on radar box :(
No. I am using Windows 8.1

hmmm... So I went out and purchased windows 8.1 last night. Unfortunately I'm getting the same issue. Radar box just keeps saying no hardware is connected. Windows is seeing my flightstick no problem but its coming up unspecified. I've ran the microbox driver exe multiple times but it just runs a cmd bat says "Successful" I do a restart and it still shows unspecified.
Logged

Runway 31

  • Moderator
  • Hero Member
  • *****
  • Posts: 34069
Re: Feeding AIRNAV without a raspberry pie
« Reply #10 on: June 06, 2019, 06:30:32 PM »
Once again contact [email protected] fot advice

Alan
Logged

Runway 31

  • Moderator
  • Hero Member
  • *****
  • Posts: 34069
Re: Feeding AIRNAV without a raspberry pie
« Reply #11 on: June 06, 2019, 06:31:56 PM »
Also did you try updating the driver through your unspecified
Logged

abcd567

  • Hero Member
  • *****
  • Posts: 890
  • CYYZ - Toronto
Re: Feeding AIRNAV without a raspberry pie
« Reply #12 on: June 06, 2019, 10:33:04 PM »
I am using driver Zadig with Win 8.1. Zadig works perfectly well with Win 8.1

(With Win 10, Zadig may or may not work)

Method to install rtl-sdr driver zadig:

Is My DVB-T RTL SDR Dongle Healthy?


Go to  OPTION-1, and carry out "STEP 1 of 3" ONLY.


.
« Last Edit: June 06, 2019, 10:41:42 PM by abcd567 »
Logged

upperfi

  • New Member
  • *
  • Posts: 21
Re: Feeding AIRNAV without a raspberry pie
« Reply #13 on: June 07, 2019, 04:53:10 AM »
Quote from: Runway 31 on June 06, 2019, 06:30:32 PM
Once again contact [email protected] fot advice

Alan

I have been in contact with support. Been troubleshooting with no luck unfortunately
Logged

upperfi

  • New Member
  • *
  • Posts: 21
Re: Feeding AIRNAV without a raspberry pie
« Reply #14 on: June 07, 2019, 04:56:09 AM »
Quote from: abcd567 on June 06, 2019, 10:33:04 PM
I am using driver Zadig with Win 8.1. Zadig works perfectly well with Win 8.1

(With Win 10, Zadig may or may not work)

Method to install rtl-sdr driver zadig:

Is My DVB-T RTL SDR Dongle Healthy?


Go to  OPTION-1, and carry out "STEP 1 of 3" ONLY.


.

ah!,.. I've only tried zadig with windows 10.. I purchased a copy of windows 8.1 yesterday. I will try this next. I'm on a mission to get this working haha
Logged
Pages: [1] 2 3
« previous next »