AirNav RadarBox 5.00.65 - Download Available

[andyapples]

Evening Alan,

Many thanks for the prompt reply. When I uninstalled then reinstalled
my RadarBox I did a full install rather than an upgrade. Maybe that's
the problem? Would you suggest reinstalling my Radar Box again
then doing just an upgrade?

Many Thanks,

Kind Regards,

Andy

[Runway 31]

Andy,

There should be no reason why the full install shouldnt work perfectly well.  If the suggestions in my last reply dont help I'm stumped and would suggest an email to support.

Alan

[andyapples]

Many thanks for the reply Alan.

I'll do an uninstall/reinstall then upgrade and see if that works.

If not, then I'll contact support and see if they can suggest anything.

Kind Regards,

Andy

[dxman]

I have got the following problem :
Some planes don`t time-out and stay on the interface and on the radar screen til I restart the program.
Timeout setting 5 sec.   hide timeout 5 sec.

Erik

[Runway 31]

Erik,

It may be worthwhile trying a few sconds more on the hide time out setting.

Suggest you contact support on [email protected]

Alan

[dxman]

oke i,ll try that.

the only thing that dissapears, is the little globe and the distance figures

[Runway 31]

Erik see my other suggestion re time out

Alan

[dxman]

I set the the hide time on 10sec.
I`ll wait till 24.00 and make a screenshot so I can see how many planes are still there.
after that I`ll restart the programm and see what is left.

[Runway 31]

I would drop support an email

Alan

[dxman]

I already did, now wait for a reply

[LSZS]

Is there anyone who doesn't have problems when trying to connect remotely?
I can't connect remotely otherwise the ANRB software crashes...

[Runway 31]

LSZS,

There are some users on here who connect remotely and dont appear to have many issues.  I know that Ingo for example connects remotely.  Why dont you PM him and find out how he manages.

Alan

[LSZS]

Thanks Alan
I write a PM to Ingo.
Stefano

[RodBearden]

Hi Alan

That Mexican navy Gulftream has just highlighted a minor problem with the logos routine:

It's using a flight id of ANX207, while its reg is ANX-207. It's not showing the ANX logo which is in the folder.

The logic should be that if there is a logo matching the registration (stripped of punctuation) it should display a logo matching that, but if there isn't, it should look at the first three letters of the ID and look for a logo matching that. I've tested it with a logo called ANX207 and it does display that.

Please pass this on to Dev.

[Runway 31]

Rod,

I changed the serial on here yesterday morning.  Its is AMT-207, however I mucked up the serial in the database which I have now corrected, sorry.

Alan