anything
AirNav RadarBox
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
 


Author Topic: What Antenna Do I Need For A External Antenna , (More Info In Desc)  (Read 3171 times)

0 Members and 1 Guest are viewing this topic.

Johnn

  • Full Member
  • ***
  • Posts: 203
  • Y'ello
I want to have a antenna outside , but is it true that the more Wire I use the less signal of something?

Also what antenna would be suitable to use for the box?

Thanks
Johnn -

PEPITO

  • New Member
  • *
  • Posts: 22
Re: What Antenna Do I Need For A External Antenna , (More Info In Desc)
« Reply #1 on: September 20, 2008, 06:23:31 PM »
Hi,
I am testing this equipment from LEPA in Majorca and things look very good.
Yes I suppose that more cable you use the more noise you will get.
I am using 20m of cable and things look prety good.


GP-1090 Antenna
1m low loss cable Ecoflex-10 with N connectors
Mast pre-amplifier AS-1090
20m low loss cable Ecoflex-10 with N connectors
AS-1090BT Bias-T for DC-Feed
1m Cable BNC/SMA

Got it from WIMO.com

CoastGuardJon

  • Hero Member
  • *****
  • Posts: 1178
  • Mullion Cove, Kernow --- sw Cornwall UK.
Re: What Antenna Do I Need For A External Antenna , (More Info In Desc)
« Reply #2 on: September 20, 2008, 06:27:15 PM »
Hi John, I'm not RB equipped yet and a newbie, but have been into radio for 50 years.   Every metre of co-ax reduces/degrades the signal somewhat - the better the quality (and bigger diameter) the less degradation.   There's several topics on the go in here, including this one

http://www.airnavsystems.com/forum/index.php?topic=1445.0

which address some of your queries.
ANRB :  AOR AR8000 : Icom R-7000 : Icom IC-R9000 : JRC NRD-545 : OptoElectronics Digital Scout and OptoLinx Interface; Realistic Pro-2005 : UBC 800XLT - listed in alphabetical order, not cost, preference, performance or entertainment value!