(windows 10

[briand]

Help
I have a new navbox and windows 10 how do I set it all up to start it running I would think the CD is out of date

sorry for being a bit thick
Brian

[Runway 31]

Hi Brian,

Version 6 is the latest software from here http://www.airnavsystems.com/download/ANRB/ANRB60000Setup.exe download and install it.  Avoid the program files location and instil to somewhere like c:\Airnav

Once installed you will need the Windows 8 drivers from here
http://www.airnavsystems.com/download/anrb/drivers/ANRB-Win8Drivers-v2.08.30.zip

To load them in you will need to follow

. From the Metro Start Screen, open Settings (move your mouse to the bottom-right-corner of the screen and wait for the pop-out bar to appear, then click the Gear icon).
2. Click 'Change PC Settings'.
3. Scroll down, and click 'update and recovery'
4. Click 'recovery'
5. Click under advanced start up and restart now
6. Click 'Troubleshoot'
7. Click 'Startup Settings'
8. Click Restart 
9. When Win8 restarts type the number next to \"Disable driver signature enforcement\"

Instructions:
1- Download the file above;
2- Unzip it to a folder on your computer;
3- Disconnect your RadarBox USB cable, wait a few seconds and connect it again;
4- When Windows prompts you to find the proper RadarBox driver browse the folder where you have extracted your drivers to;

If the above Windows prompt box does not appear:
1- Go to Windows Control Panel - Device Manager- USB Controllers - RadarBox - Driver -  Update Driver
2- Point at the relevant folder and install the drivers;

You should then be good to go and start up the software.

Alan

[briand]

Thanks your your a star

Brian

[Runway 31]

Wait till we see if you get up and running first!!

Alan

[briand]

good point but you sound like you now what your doing

Brian

[briand]

Alan
just read your answer again and ive noticed its for windows 8 will it work with windows 10 or would it be better
to go back to 8

Brian

[Runway 31]

No, the same drivers will do OK for W10

Alan

[briand]

I promise this is the last question when I download the software should the usb cable be unplugged from the navbox

Thanks Alan

[Runway 31]

Yes leave it unplugged until you have installed the software and the driver

Alan

[briand]

Thanks

[Runway 31]

Brian,

As peer the driver instructions in the first post

Instructions:
1- Download the file above;
2- Unzip it to a folder on your computer;
3- Disconnect your RadarBox USB cable, wait a few seconds and connect it again;
4- When Windows prompts you to find the proper RadarBox driver browse the folder where you have extracted your drivers to;

Alan

[briand]

Thanks again Alan

[N9JIG]

Alan:

Do you know when/if Windows 10 certified drivers will be released? In order to get it to load on Windows 10 I had to turn off Driver Signature Enforcement.

[Runway 31]

No idea if they will get them certified.

Alan

[N9JIG]

I contacted Support and they said they are working on them. They should be available soon.