AirNav RadarBox
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
 


Author Topic: Radarbox Data Sharer 1.20 v.RB24120 Installation  (Read 5009 times)

0 Members and 2 Guests are viewing this topic.

Luigi_YOW

  • New Member
  • *
  • Posts: 1
Radarbox Data Sharer 1.20 v.RB24120 Installation
« on: March 27, 2016, 12:04:05 AM »
Need Help ?

My Radarbox Data Sharer 1.20 v.RB24120 has been installed and all parameters appears to be ok with the exception of the [Stats] which are all at "0" and this: [Input Port] : Not connected [yellow box].

I have a NESDR Mini SDR & DVB-T USB Stick (RTL2832 + R820T) and Antenna;
The Software packaged installed for this are:
-Zadig
-CubicSDR
-RTL 1090 IMU from: jetvision.de v. B:103, and finally:
-Radarbox Data Sharer 1.20 v.RB24120

I can see the data on traffic on my RTL 1090 but i cannot see it on my RadarBox Account and it does not appear to be share on RB24. The RTL 1090 TCP port is: 31001

What I am missing ?
What tweaking do i have to do to MS Windows 10 to get this data shared on RB24

Anybody ?
Thank for your time



neroon79

  • Hero Member
  • *****
  • Posts: 4657
Re: Radarbox Data Sharer 1.20 v.RB24120 Installation
« Reply #1 on: March 28, 2016, 11:25:18 AM »
Hi Luigi,

sorry for the late reply. The sharing software needs the following in dump1090.bat:

--net-sbs-port 30003

The sharing software needs SBS Basestation compatible data stream on port 30003. Unfortunaltely other data format or other port won't work.

Ingo
Greetings from northern Germany, Ingo
11.75nm ESE of EDDV

SW: ANRB v5.00.072/6.01.001 on WIN10 64Bit Pro&Home
HW:
Ant.: DPD Productions ADS-B Vertical Outdoor Base Antenna
AMP: Kuhne electr. KU LNA 1090 A TM
Cable: 25m of ECOFLEX 15+
NB: Asus P53E 24/7 op.
PC: 28"4K + 24" Monitor
AirSpy mini @RPi3

Runway 31

  • Moderator
  • Hero Member
  • *****
  • Posts: 29474
Re: Radarbox Data Sharer 1.20 v.RB24120 Installation
« Reply #2 on: March 30, 2016, 04:49:32 PM »
Contact [email protected] for assistance

neroon79

  • Hero Member
  • *****
  • Posts: 4657
Re: Radarbox Data Sharer 1.20 v.RB24120 Installation
« Reply #3 on: March 30, 2016, 06:26:08 PM »
Update:

If you want to use RTL1090.exe:

- close rtl1090.exe
- go to the folder were the RTL1090.exe is.
- Look for rtl1090.ini and open it.
- look for the folowing entry: cb130003=0
- replace the "0" with "1": cb130003=1
- save and close the rtl1090.ini
- open rtl1090.exe

Ingo
Greetings from northern Germany, Ingo
11.75nm ESE of EDDV

SW: ANRB v5.00.072/6.01.001 on WIN10 64Bit Pro&Home
HW:
Ant.: DPD Productions ADS-B Vertical Outdoor Base Antenna
AMP: Kuhne electr. KU LNA 1090 A TM
Cable: 25m of ECOFLEX 15+
NB: Asus P53E 24/7 op.
PC: 28"4K + 24" Monitor
AirSpy mini @RPi3

big

  • New Member
  • *
  • Posts: 1
Re: Radarbox Data Sharer 1.20 v.RB24120 Installation
« Reply #4 on: April 04, 2016, 02:14:55 PM »
...or use modesmixer...

for example

modesmixer2.exe  --inConnect 127.0.0.1:30005  --outServer msg:30003

Work perfect :)

Kirill

  • New Member
  • *
  • Posts: 4
Re: Radarbox Data Sharer 1.20 v.RB24120 Installation
« Reply #5 on: May 18, 2020, 03:55:50 PM »
My dump1090.bat
dump1090.exe --device-index 1 --gain 48 --net --interactive --net-bo-port 30005 --modeac --max-range 500 --fix --phase-enhance --metric
pause

All work