AirNav RadarBox 5.00.71 - Download Available

Started by AirNav Development, February 26, 2014, 07:42:49 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Runway 31

Ian, you must close down.  The installer would note if RB was running and would advise to close down first.

Alan

jacobite

#31
Quote from: Runway 31 on March 03, 2014, 08:31:48 AM
Ian, you must close down.  The installer would note if RB was running and would advise to close down first.

Alan

Thanks Alan. I have just updated and all seems to be working fine.

GreekSpy2001

just to add.  Just downloaded and installed ver 0071 and have the double flight ID in my alert pop ups.  Makes the alert pop up very wide.  See attached screen shot.

Graham

neroon79

Hallo Alan,

the freecing of flight could have been related to an installation of a windows security patch, performe by windows update without my permission. During regular operation I haven't had any flight freeces so far.

Ingo
Greetings from northern Germany, Ingo
11.75nm ESE of EDDV

SW: ANRB v5.00.072/6.01.001 on WIN10 64Bit Pro&Home
HW:
Ant.: DPD Productions ADS-B Vertical Outdoor Base Antenna
AMP: Kuhne electr. KU LNA 1090 A TM
Cable: 25m of ECOFLEX 15+
NB: Asus P53E 24/7 op.
PC: 28"4K + 24" Monitor
AirSpy mini @RPi3

Runway 31

Thanks Ingo,

We havent noted any problems so would be obliged if you could advise if and when it occurs again.

Alan

neroon79

Greetings from northern Germany, Ingo
11.75nm ESE of EDDV

SW: ANRB v5.00.072/6.01.001 on WIN10 64Bit Pro&Home
HW:
Ant.: DPD Productions ADS-B Vertical Outdoor Base Antenna
AMP: Kuhne electr. KU LNA 1090 A TM
Cable: 25m of ECOFLEX 15+
NB: Asus P53E 24/7 op.
PC: 28"4K + 24" Monitor
AirSpy mini @RPi3

Runway 31

Jonathan, please advise when it occurs again, we are not seeing any problems.

Alan

Runway 31

No problem Ingo, hopefully you will not need to contact re this issue.

Alan

shouriken

I confirm that the "Mylog/Grids/Populate" was not fixed.

As the first post of this topic says
QuoteAll pending bugs corrected except:
- Erroneous altitude reported after timeout
I'd expected to be fixed.
Liviu
A.net JetPhotos.Net
RadarBox
2xRTL USB + Franklin+Collinear antenna + PlanePlotter

Runway 31

Populate has been fixed will be in the next version and the erroneous altitude issue is being worked on at this time

Alan

PatW

I am going with version 3.13, could someone advise the easist way to get up to date, I assume that I will need to remove version 3.13 and start again with the newer version but how many additional downloads are there after the re-install.
Thanks for any advice
Pat

Runway 31

Pat,

Yes uninstall 3.13 but save your mulog, photos etc for re-use withthe new vwrsion and replace them after installation.

The last full install was for 5.00.65 here http://www.airnavsystems.com/download/ANRB/ANRB50065Setup.exe

Then upgrade to the latest 5.00.71 here http://www.airnavsystems.com/download/ANRB/ANRBUpgradeto50071.exe

Alan

PatW


Jonathan.G


Runway 31

#44
Jonathan,

We would need the eureka log or other error report or log to see what is happening on your system.  Its very hard for a diagnosis otherwise especially when others are not experiencing the same.

Alan