New AirNav RadarBox 5.00.62 Beta Upgrade

[flygfantast]

Upgraded to 5.00.063 and the "PZP" flight ID is back again. :(

Niklas

[EK01]

Alan,

That was a quick reply !

Have a good New Year. One hour ahead over here so drinking time before you.

Ian

[Runway 31]

Just depends on when I look at the board.

Depends when you start though!!!

Have a good one Ian, all the best to you and Marie

Alan

[Starburstdave]

Alan
Thanks for your help. I have downloaded the full install package and will  uninstall and then a full fresh install later today and I will let you know if this fixes the problem.

Dave

[RodBearden]

I've done the upgrade to .063, and the PZP flight ID has returned - in this case for 405858 G-KKEV.

[tarbat]

I have a problem. After instalation ARB 5.00.63 (time is good) when I switch on Radar rings button i see white circle - see pic. When I Radar rings button off - see pic. Can you help , me please? Before V 5.00.63 I don't have problem :-(

I've done the upgrade to .063, and the PZP flight ID has returned - in this case for 405858 G-KKEV.

Looks like this v63 isn't the same v63 I beta tested, and some previous bugs have been re-introduced :(

[Runway 31]

Will pass these to Airnav.  As Tarbat states we never saw these in Beta testing so dont know what has happened.  We have done nothing with the rings since Jason had the problem over inland waterways a couple of months ago and again it appears to be affecting a very few users.

Alan

[neroon79]

Confirming, that I've PZP flight id's with old box, but haven't PZP flight ids on the newer one yet.

If I'm programming and if I would use beta expiration dates, I would put away every released version (although they are in beta state), so I can fall back on them if next version isn't ready at time. In that case I would set expiration date to next month and re-release the last beta with new expiration date instead of doing what ever they may have done with the V5.00.63 relaese.

Ingo

[CYYZGUY]

I am at work now, but will try the upgrade when I get home and test the radar rings and let you know.

Looks like I have no choice if I want to continue using radarbox....

regards,

Jason

[Starburstdave]

Alan
I have done a new install and still get the same problems with the radar rings but on closer examination it seems to be that when I click an aircraft in the list that is not within the rings range  the rings display normally but as soon as I highlight one inside the radar rings it turns into the big white circle. I hope this further info is of some use.

Dave

[Starburstdave]

Alan

I have attached a screen shot of what is happening.

Dave

[neroon79]

Have You tried to change the radar-ring colour from White to grey?

[Runway 31]

Yes Dave, can you try it with the standard colour instead of the customised white please and advise how it is.

Vena have you changed the rings colour away from the default?

Alan

[granpa]

This has happened to me now on 4 occasions  as well, my cure which seems to work every time so far is to go to map then trail lines on or off depending on how you have them set, i thought it might be a nvidia graphics card problem, i'll test some more and let you know.

Andy

[Starburstdave]

Alan/Ingo
Reset map back to default Real Radar but still got the white circle .Just tried what granpa suggested with the trail lines toggle on /off and at the moment everything is ok. How strange?

Dave