Hi Gonz, in addition to Jason's comments about waterproofing, I would add the following - pack any joints/connectors with electrician's grade silicone grease (I wouldn't use GP silicone sealer as this releases some corrosive acid fumes), also if you can get armoured cable termination sleeves and place these over the top of any joints with open bottom end so water and moisture don't get trapped - if you don't understand quite qhat I mean, I'll try to find some pics. Please bear in mind if a plane not squitting full ADSB signal, you're not going to get a plot. Military aircraft usually don't or if they do, it can be "manufactured" misinformation!