AirNav RadarBox
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
 


Author Topic: Help, I lost them  (Read 2355 times)

0 Members and 1 Guest are viewing this topic.

FACTflights

  • Full Member
  • ***
  • Posts: 151
  • Amateur Radio is my hobby.
Help, I lost them
« on: August 02, 2012, 04:49:11 PM »
Help, I've lost the little aircraft and the data that goes at the end of the trail lines.
John
ZS1AGH
We live under a rock:  Table Mountain

Icom IC 706 Mk II G; Icom IC 726; Icom IC T22E; Yaesu 290R; Alinco DJ-V5 
No HF antennae at the moment.

RodBearden

  • Hero Member
  • *****
  • Posts: 8818
    • Rod's RadarBox Downloads
Re: Help, I lost them
« Reply #1 on: August 02, 2012, 05:17:19 PM »
Hi FACTflights

I think you need File...Preferences and the options down the left side of the first (General) tab. You get the little aircraft by unchecking "Square Label".

HTH

Rod
Rod

FACTflights

  • Full Member
  • ***
  • Posts: 151
  • Amateur Radio is my hobby.
Re: Help, I lost them
« Reply #2 on: August 02, 2012, 05:27:09 PM »
Hello Rod,

Square label is not checked. 

John
John
ZS1AGH
We live under a rock:  Table Mountain

Icom IC 706 Mk II G; Icom IC 726; Icom IC T22E; Yaesu 290R; Alinco DJ-V5 
No HF antennae at the moment.

neroon79

  • Hero Member
  • *****
  • Posts: 4657
Re: Help, I lost them
« Reply #3 on: August 02, 2012, 05:35:17 PM »
Go to "File"
then select "Preferences"
under sub menu "General", frame section "Label" tick/untick" the following:

-untick Square Label
-check font and font size

If you have too many airframes in an area, all label -containing the flight number, registration and altitude, rate of descend, speed- will disappear, to keep the radar screen "readable". If you zoom in the map to get a lower airframe per area rate the labels should reappear. As far as I know, there is no option integrated to fully remove the appearance of this data-labels.

Next time please be more specific with your problem. Because the way you state your question was on the edge to require mind-reading capabilities.

Greetings from northern Germany, Ingo
11.75nm ESE of EDDV

SW: ANRB v5.00.072/6.01.001 on WIN10 64Bit Pro&Home
HW:
Ant.: DPD Productions ADS-B Vertical Outdoor Base Antenna
AMP: Kuhne electr. KU LNA 1090 A TM
Cable: 25m of ECOFLEX 15+
NB: Asus P53E 24/7 op.
PC: 28"4K + 24" Monitor
AirSpy mini @RPi3

neroon79

  • Hero Member
  • *****
  • Posts: 4657
Re: Help, I lost them
« Reply #4 on: August 02, 2012, 05:36:47 PM »
Square label is not checked. 
In this case, have you tried a re-start of the Software and your whole machine?
Greetings from northern Germany, Ingo
11.75nm ESE of EDDV

SW: ANRB v5.00.072/6.01.001 on WIN10 64Bit Pro&Home
HW:
Ant.: DPD Productions ADS-B Vertical Outdoor Base Antenna
AMP: Kuhne electr. KU LNA 1090 A TM
Cable: 25m of ECOFLEX 15+
NB: Asus P53E 24/7 op.
PC: 28"4K + 24" Monitor
AirSpy mini @RPi3

FACTflights

  • Full Member
  • ***
  • Posts: 151
  • Amateur Radio is my hobby.
Re: Help, I lost them
« Reply #5 on: August 02, 2012, 06:45:46 PM »
Thanks guys,

You guys put me on the right track.

Found it, butter fingers changed the font. 
Only "Terminal" seems to work correctly. 
Font size was not changed.

I found it by firing up the old 32 bit computer and comparing notes. 


   
John
ZS1AGH
We live under a rock:  Table Mountain

Icom IC 706 Mk II G; Icom IC 726; Icom IC T22E; Yaesu 290R; Alinco DJ-V5 
No HF antennae at the moment.