My Radarbox has just stopped working.

[CHILL51]

My radarbox has stopped working. I have the power light on but the usb light flashes now and again but nothing from the signal light.
I have version 3.13. The usb light seems to flash once a second ive rebooted several times but no good any ideas ???????

Thanks

Mike

[Southwest]

Try re-loading the software.

[CHILL51]

yep done that aswell and still no good.

Thanks for the quick reply.

Mike

[bearcat]

Is your antenna connected ok? If you are using the standard twig have a look to see if the centre pin is showing, sometimes it would work it's way into the cable causing a bad or no connection,

[CHILL51]

Yeah ive checked the antenna connections i use an external antenna and everything was working fine until today. Im stumped !!!!! I have no idea whats wrong with it.

Mike

[abrad41]

You could try changing the USB lead

[CHILL51]

I was thinking maybe it might be the usb cable its worth a try. I will get one tomorrow and see if it works.

Thanks

Mike

[Southwest]

The USB lead is a known problem.

[CHILL51]

Ah right thanks for that southwest. Fingers crossed it will do the trick as i can,t really think of anything else.

Mike

[AirNav Support]

If that doesn't work, contact us and we will give you details on returning it.

[CHILL51]

Ok will do thanks

Mike

[CHILL51]

Well i changed the usb and still no good so i guess its time to send it off.

Mike

[rashers]

mike im having same problem network is showing yellow hardware showing red when i plug in usb cable it comes up usb devise not regonised can anyone solve this problem regards keith

[AirNav Support]

rashers,

You need to install the drivers. Have a look at

http://www.airnavsystems.com/RadarBox/help/hardware_connection.htm

[puddy]

mike im having same problem network is showing yellow hardware showing red when i plug in usb cable it comes up usb devise not regonised can anyone solve this problem regards keith

I have the same problem this morning

A pattern is emerging

Puddy