AirNav RadarBox
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
 


Author Topic: Newbie Setup Help Needed...  (Read 4127 times)

0 Members and 3 Guests are viewing this topic.

scaramonga

  • New Member
  • *
  • Posts: 2
Newbie Setup Help Needed...
« on: January 11, 2010, 01:46:31 AM »
Hello all!!

OK, be gentle lol :)

Ordering this tomorrow, will u guys let me know if this setup is OK??

I'm residing in Dunfermline, UK (Scotland) with quite large open spaces around where I live.

58.4m from Glasgow Airport
81.3m from Prestwick Airport
14.7m from Edinburgh Airport

Items I'm gonna order are:

RADARBOX-2010   
RADAR-COM-20 RADAR-EXTENDER Antenna, A12-1090, BT-12, all necessary coax leads 20m BT-12-PSU (full kit with pre-amp)
BT-12-PSU UK mains 230V power supply for Elad BT-12   
AR-108 Maycom Airband Receiver (any better alternative welcomed)   
WBA-20 Airband Base Vertical (for above and any better alternative welcomed)

Wasting my time? lol or is that OK??

Any good advice much appreciated guys.

Many thx :)


nortonbeak

  • Sr. Member
  • ****
  • Posts: 318
  • RadarBox MVT7100 PCR1000 M0NBK
Re: Newbie Setup Help Needed...
« Reply #1 on: January 11, 2010, 09:06:56 AM »
Thats quite a set up!

The preferred pre-amp seems to be the Kuhne over the Elad, but I don't have experience of either.

The Maycom won't be the best ever scanner but I would see how you get on with it before blowing more cash on something with more bells and whistles.

Best of luck.

You will likely find, as it has for the rest of us, that it will open up vast areas of interest. You will find yourself fascinated for hours on end.

tarbat

  • ShipTrax Beta Testers
  • Hero Member
  • *
  • Posts: 4219
    • Radarbox at Easter Ross
Re: Newbie Setup Help Needed...
« Reply #2 on: January 11, 2010, 12:05:21 PM »
Looks like an excellent Radarbox setup.   Great to see another user in Scotland!!   To give you a taster, here's the current network view of aircraft in your area.


CoastGuardJon

  • Hero Member
  • *****
  • Posts: 1178
  • Mullion Cove, Kernow --- sw Cornwall UK.
Re: Newbie Setup Help Needed...
« Reply #3 on: January 11, 2010, 01:14:29 PM »
Hi scaramonga, I hope you're shopping around for your items, as some charge over the odds. Is your location high and in the clear?    I'd be trying the system without a pre-amp (how high will the antenna be sited and how much co-ax do you need? bear in mind, you need a 20mm hole for a N-type plug to pass through), and probably go for a Uniden BearCat scanner.   What co-ax are you ordering?    Good luck, let us know how you get on!
ANRB :  AOR AR8000 : Icom R-7000 : Icom IC-R9000 : JRC NRD-545 : OptoElectronics Digital Scout and OptoLinx Interface; Realistic Pro-2005 : UBC 800XLT - listed in alphabetical order, not cost, preference, performance or entertainment value!

scaramonga

  • New Member
  • *
  • Posts: 2
Re: Newbie Setup Help Needed...
« Reply #4 on: January 11, 2010, 09:51:14 PM »
Thx guys :)

Any where I can get this stuff much cheaper then? They all seem to average same prices from where I've checked. I reckon I'll need 10-15m of cable and it is the Westflex 103 low loss flavour, which I take it will be OK?  Antenna will be sited on top of 4 block building using a mast, which should give a good clear line of sight in all directions. :)

Thx for network taster tarbat :)

Jeremy

  • Sr. Member
  • ****
  • Posts: 369
  • Jeremy
Re: Newbie Setup Help Needed...
« Reply #5 on: January 11, 2010, 11:47:24 PM »
If you have your antenna up on top of a 4 story building them I would not bother with the pre-amp. W103 is fine but would not go with more tham 15m of coax.
Good luck. I think you should see amazing results depending on your geographical line of sight.
J.
G4DOQ
QRZ.com

pjm

  • RadarBox Beta Testers
  • Sr. Member
  • *
  • Posts: 477
Re: Newbie Setup Help Needed...
« Reply #6 on: January 12, 2010, 12:48:40 AM »
I reckon I'll need 10-15m of cable and it is the Westflex 103 low loss flavour, which I take it will be OK?  Antenna will be sited on top of 4 block building using a mast, which should give a good clear line of sight in all directions. :)

I would also suggest the pre-amp may not be required. I got pretty much the same setup as you, with 10 metres of Westflex 103 co-ax, and with the pre-amp inline and powered I actually receive LESS aircraft that with it off. I bought a second pre-amp thinking the first one was faulty with the same result.

The consensus at the time was that the pre-amp is actually overloading the Radarbox.