anything
AirNav RadarBox
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
 


Author Topic: Is There Anywhere That Supplys Co-ax Cable With The Connectors Fitted?  (Read 2645 times)

0 Members and 1 Guest are viewing this topic.

Johnn

  • Full Member
  • ***
  • Posts: 203
  • Y'ello
Many Thanks
John
Johnn -

RodBearden

  • Hero Member
  • *****
  • Posts: 9128
    • Rod's RadarBox Downloads
Re: Is There Anywhere That Supplys Co-ax Cable With The Connectors Fitted?
« Reply #1 on: October 25, 2009, 09:30:59 PM »
I used this guy - he posted it very quickly, good patch lead supplied to connect to the RB - I recommend him - phone to make sure he fits the right connectors.

Edit - this link is better for the cables: http://www.airbandonline.co.uk/kapl_sbs1_aerial.htm

Rod
« Last Edit: October 25, 2009, 09:36:01 PM by RodBearden »
Rod

Canonjohns40D

  • Hero Member
  • *****
  • Posts: 990
Re: Is There Anywhere That Supplys Co-ax Cable With The Connectors Fitted?
« Reply #2 on: October 25, 2009, 09:50:32 PM »
Hi John i used W H Westlake http://whwestlake.110mb.com/. they were also very good and excellent delivery service with good quality items. i got cable and connectors for both the Radarbox and my airband radio.

John
Hi I'm John... and I'm a Radarbox User. I'm based in Bangor Co Down Northern Ireland.

anorak

  • Hero Member
  • *****
  • Posts: 977
  • support The Devon Air Ambulance Trust
Re: Is There Anywhere That Supplys Co-ax Cable With The Connectors Fitted?
« Reply #3 on: October 25, 2009, 09:59:03 PM »
Yes Henry is the chap to use, did the same as John, but I could pop down and collect them.
Dave.
Dave. Exmoor, North Devon.

Johnn

  • Full Member
  • ***
  • Posts: 203
  • Y'ello
Re: Is There Anywhere That Supplys Co-ax Cable With The Connectors Fitted?
« Reply #4 on: October 25, 2009, 11:41:22 PM »
Okay, Thank You -Everyone, Ill give  http://whwestlake.110mb.com a try.
Thanks Again
John
Johnn -

CoastGuardJon

  • Hero Member
  • *****
  • Posts: 1178
  • Mullion Cove, Kernow --- sw Cornwall UK.
Re: Is There Anywhere That Supplys Co-ax Cable With The Connectors Fitted?
« Reply #5 on: October 26, 2009, 02:34:56 PM »
Hi John, bear in mind that if an N-type plug is at both ends, it needs a 1" hole to pass through, as opposed to the 10.3mm of th co-ax or 5mm if it's RG-58!
ANRB :  AOR AR8000 : Icom R-7000 : Icom IC-R9000 : JRC NRD-545 : OptoElectronics Digital Scout and OptoLinx Interface; Realistic Pro-2005 : UBC 800XLT - listed in alphabetical order, not cost, preference, performance or entertainment value!