anything
AirNav RadarBox
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
 


Author Topic: Aerial on roof  (Read 3156 times)

0 Members and 1 Guest are viewing this topic.

grumpypsat

  • New Member
  • *
  • Posts: 4
Aerial on roof
« on: February 16, 2009, 11:20:49 AM »
Morning

At the moment I have my SBS-1 connected to my roof aerial I am in the process of buying radarbox 2009, is it possible to connect both systems to the same roof aerial

Ian

AirNav Support

  • AirNav Systems
  • Hero Member
  • *****
  • Posts: 4127
Re: Aerial on roof
« Reply #1 on: February 16, 2009, 11:33:30 AM »
You can find Y splitters, but it depends on whether its BNC connection.
Contact Customer/Technical support via:
http://www.airnavsystems.com/contact.html
[email protected]

Cumulus

  • Jr. Member
  • **
  • Posts: 55
Re: Aerial on roof
« Reply #2 on: February 16, 2009, 11:56:43 AM »

is it possible to connect both systems to the same roof aerial

Ian

This would be ideal with two pigtails "N to SMA" and "N to BNC" which SSE can
supply.

http://www.ssejim.co.uk/25-coaxialcable&accessoriesfor1090sj.htm

TELEWAVE, INC
RF POWER SPLITTER- COMBINER “N”
• Model: SSE PD 807 • 50 OHMS
• Frequency Range: Approx. 760 to 1100MHz

Cheers,

Peter

peteeds

  • New Member
  • *
  • Posts: 36
  • RADIO AMATEUR (2W1FJZ - MW3PET )
Re: Aerial on roof
« Reply #3 on: February 16, 2009, 12:24:49 PM »
Hy, grumpypsat, I am running both systems here off one external antenna, I bought a bnc tee splitter which is connected to the output of the jim preamp with pigtails running to RB & SBS. Tee splitter from maplins also bnc to sma connecter for RB from maplins, Waiting on delivery from USA on new external antenna which i hope will be a big improvement here, ( I live in a very narrow Valley) will post results when up & running.

Cheers  Peteeds. 2W1 FJZ