anything
AirNav RadarBox
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
 


Author Topic: Network and Hardware Problems  (Read 14835 times)

0 Members and 1 Guest are viewing this topic.

berlin

  • New Member
  • *
  • Posts: 7
Re: Network and Hardware Problems
« Reply #15 on: July 28, 2007, 05:30:19 PM »

Now @Allocator:

I do not own a SBS-1 receiver but have only a Radarbox positioned in Berlin. The screenshots are made with the internal feature of the Radarbox software and the trails are also featured by the RB if you mark the origin with the mouse. The blank areas are not desired but also a feature of the RB. I want those eliminated...
(I am not sure if I understood you right and this answers your question!)

berlin

  • New Member
  • *
  • Posts: 7
Maximum distance limit
« Reply #16 on: July 31, 2007, 03:06:02 PM »

I have also noticed several times now (different days with different propagation) that the maximum displayed distance of my own received RB signals is 269.951 NM (500 km). This distance was monitored by RadarBox Explorer.  This could be a software bug or software limit as well?!

regards


AirNav Support

  • AirNav Systems
  • Hero Member
  • *****
  • Posts: 4124
Re: Network and Hardware Problems
« Reply #17 on: July 31, 2007, 03:13:42 PM »
Hi Berlin,

Some aircraft have defective ADS-B transponders which mean they occasionally give out wrong position information which may cause anomalies.

Anything above 250 nm will be at the edge of your line of sight due to the curvature of the earth.

Hope that helps.
Contact Customer/Technical support via:
http://www.airnavsystems.com/contact.html
[email protected]