I do not understand because I configure well the ip of my raspberry into the software but it doesn't work. I configured the rbfeeder see below:
[client]
network_mode=false
log_file=/var/log/rbfeeder.log
key=****
sn=****
lat=****
lon=****
alt=****
[network]
mode=beast
external_port=30005
external_host=127.0.0.1
[mlat]
autostart_mlat=true
#mlat_cmd=/usr/bin/python3.9 /usr/bin/mlat-client
[dump978]
#dump978_enabled=false
I see my data on radarbox.com but not on the software...
(1) Your rb24feed.ini file settings are OK,
if you have NOT installed any external decoder such as dump1090-fa, or dump1090-mutability, or readsb.
(2) You need to install AirNav Radarbox Software
Ver 6.02.003.
The version 6.01 does NOT have facility to use data from rbfeeder on RPi. It requires a dongle to be plugged in into the PC.
(3) You Need to obtain another station number for AirNav Radar Box V6.02.003 if you already do not have it. The V6 accepts station numbers in the format EXTSHAxxxxxx or PGANRBxxxxxx. The RPi station numbers are in the format EXTRPIxxxxxx, and V6 software does NOT accept these.
To obtain a V6 compatible Station, download and install following software on your Windows PC.
http://www.airnavsystems.com/download/rb24/RB24DataShare120Setup.exe After installation, login using Email and a password of your choice to generate the station number in format EXTSHAxxxx.
Please see 2 screenshots attached below(4) After generating this Station number, you can use the email and password (which you used on RadarBox24 DataSharer 1.20) on V6 to loggin and start. Without logging-in , V6 wont start.
(5) Make settings in V6.02.003 as shown in screenshots of following post:
https://forum.radarbox24.com/index.php?topic=107021.msg545361#msg545361