anything
AirNav RadarBox
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
 


Author Topic: Mlat Open Source Agorithms  (Read 1752 times)

0 Members and 1 Guest are viewing this topic.

DRojas7105

  • New Member
  • *
  • Posts: 3
Mlat Open Source Agorithms
« on: August 19, 2022, 03:57:13 PM »
Hi. I am working on a school project and wanted to ask the group if you were aware of any mlat algorithms that are open source that I could use with the XRange2 stations and the ModeS Beast output.

Any help with this from fellow avgeeks is greatly appreciated

Thank you !!

Runway 31

  • Moderator
  • Hero Member
  • *****
  • Posts: 33510
Re: Mlat Open Source Agorithms
« Reply #1 on: August 19, 2022, 06:44:58 PM »
I doubt you will find anything out there.  MLAT software is on the tracker websites servers and you will not find it in the wild

Alan

wiedehopf

  • Jr. Member
  • **
  • Posts: 66
Re: Mlat Open Source Agorithms
« Reply #2 on: August 19, 2022, 06:53:12 PM »
Have you guys even googled mlat server? ...

airnav is using that by the way, not sure if they are finally putting a URL in the client log where the server code is, because that is what the license requires.

I don't think the xrange line of receivers is user accessible but i believe it's just an rtl-sdr compatible receiver.
So .... use your own Raspbian on an extra sd-card: https://github.com/wiedehopf/adsb-wiki/wiki/Raspbian-Lite:-ADS-B-receiver
« Last Edit: August 19, 2022, 06:54:52 PM by wiedehopf »

Runway 31

  • Moderator
  • Hero Member
  • *****
  • Posts: 33510
Re: Mlat Open Source Agorithms
« Reply #3 on: August 19, 2022, 08:13:54 PM »
Cheers, thanks for the info but way above my old head

Alan

abcd567

  • Hero Member
  • *****
  • Posts: 842
  • CYYZ - Toronto
Re: Mlat Open Source Agorithms
« Reply #4 on: August 19, 2022, 09:33:00 PM »
Have you guys even googled mlat server? ...

airnav is using that by the way, not sure if they are finally putting a URL in the client log where the server code is, because that is what the license requires.


They were always putting the URL of the mlat-server code in user logs/status.

From start until recently, they were using code from mutability and specified their URL
https://github.com/mutability/mlat-server

Recently they have switched to code from adsbexchange and started specifying their URL.
https://github.com/adsbexchange/mlat-server

Please see attached screenshot.
« Last Edit: August 19, 2022, 09:34:45 PM by abcd567 »