Hardaware not connected

Bob60 · June 25, 2022, 09:32:40 AM

Hi, I'm writing from Italy, I have a FlightStick, the Airnav radarbox software says "hardware not connected" but I have no driver problems, the stick, if I open the RTL10190 software, perfectly receives the aircraft in flight. is it a software setting problem? Thanks for the help!
Roberto

Runway 31 · June 25, 2022, 01:41:05 PM

Using the V6.0.03 software, connect via your home network, set up the network connection using File/Preference on one of the tabs in their with you network credentials. I cannot remember which tab as I use V6.01.01 in Windows

Alan

Bob60 · June 27, 2022, 09:15:33 AM

Hi Alan, thanks for the reply, but I didn't understand the talk about the LAN network, my flightstick is connected directly to the PC via USB and I'm using Air Nav Radarbox 6.02.003. Should I use another version or is this okay? however the driver works but the software does not see the usb key :-(

Roberto

Runway 31 · June 27, 2022, 11:58:45 AM

Ah sorry I thought you were on a Raspberry Pi when you mentioned RTL1090. Did you install the flightstick drivers https://www.airnavsystems.com/Download/ANRB/Drivers/microRadarbox-Drivers-20150411.exe

If you have and its still not connecting use Zadig drivers https://zadig.akeo.ie/

V6.3 is designed for use with the xrange receiver, you would be better with v6.02 as a few new bugs were introduced with it https://www.airnavsystems.com/download/ANRB/ANRB60002Setup.exe

Alan

Bob60 · June 27, 2022, 03:29:27 PM

Thanks solved! :-)
Roberto

Runway 31 · June 27, 2022, 04:22:54 PM

Cheers Bob, no problem

Alan

law1979 · June 28, 2022, 01:45:58 PM

Hi

I have the exact same problem.
I can see data in the RTL10190 software.

In Airnav software : "hardware not connected".
Im using version 6.02.

How did you solve the problem please ?

Thanks

Chris

Runway 31 · June 28, 2022, 02:36:30 PM

I presume by installing the flightstick divers either the Airnav ones or the Zadig ones. Have you installed the drivers?

Alan

law1979 · June 28, 2022, 03:11:29 PM

Hi

Yes, i first installed the airnav drivers, then the zadig ones.

uninstalled airnav software, reinstalled.

Thanks.

Chris

Runway 31 · June 28, 2022, 04:16:11 PM

Do you see it in devices and printers under unspecified? How are its properties?

Try unplugging the stick and plugging it back in, also try another USB port

Alan

law1979 · June 30, 2022, 07:37:43 AM

Its working now

uninstalled the driver, reinstalled zadig driver.

Thnak you !

Runway 31 · June 30, 2022, 01:10:53 PM

Great, good news

Alan

NHSARainer · July 03, 2022, 09:45:58 PM

Quote from: Runway 31 on June 27, 2022, 11:58:45 AM
Ah sorry I thought you were on a Raspberry Pi when you mentioned RTL1090. Did you install the flightstick drivers https://www.airnavsystems.com/Download/ANRB/Drivers/microRadarbox-Drivers-20150411.exe

If you have and its still not connecting use Zadig drivers https://zadig.akeo.ie/

V6.3 is designed for use with the xrange receiver, you would be better with v6.02 as a few new bugs were introduced with it https://www.airnavsystems.com/download/ANRB/ANRB60002Setup.exe

Alan

Hi,

I am having the same problem that RadarBox v6.02.003 does not connect to my USB flightstick.

It does connect to dump1090 and I can see the filght around my antenna on VirtualRadar v2.4.4 problrm free ...

What am I doing wrong ?

I have also a RTL-SDR dongle running for another use. is there a Serial # conflict ?

Thanks for any help

regards Rainer

NHSARainer · July 03, 2022, 10:31:21 PM

I have a conflict between my RTL-SDR dongle and the RadarBox Flightstick

How can I define which dongle uses RadarBox v6.2.003 ?

Thanks Rainer

Runway 31 · July 04, 2022, 09:20:12 AM

NHS Rainer

You will need to change the serial number of the sticks to avoid conflicts, see this thread https://forum.radarbox24.com/index.php?topic=105891.0

Alan