Reinstalled and refuses to work !!!!!

[Runway 31]

Its is forbidden to prevent spamming.  The software doesn't like something being posted so is being cautious

Alan

[abcd567]

If your OS is DietPi Bullseye, do following:

Code Select Expand


sudo apt update
sudo apt install netbase
sudo reboot


Please see following posts:

https://discussions.flightaware.com/t/automated-installation-of-modesmixer2-modesdeco2-on-rpi/53899/90


https://forum.radarbox24.com/index.php?PHPSESSID=82915giiesh3sksd6b3kekoqpb&topic=101981.msg400661#msg400661


.

[Av8tor_from_Argentina]

My OS is Raspberry Pi BULLSEYE. Image was burnt with the original software downloaded from Raspberry webpage.

[abcd567]

My OS is Raspberry Pi BULLSEYE. Image was burnt with the original software downloaded from Raspberry webpage.

In this case, seems some files of OS got corrupted either during download of image or during writing it on microSD card, or during subsequent use.

(1) Delete existing copy of raspios bullseye from your computer.
(2) Download a fresh copy of raspios bullseye
(3) Write freshly downloaded image to microSD card.
(4) First install dump1090-fa and then rbfeeder and see if rbfeeder works OK. If yes, then install fr24 and piaware etc.