Do we know how to get the mlat client working on Bullseye? I have tried just about all commands and am unable to get to a screen where I enter my lon, lat etc to set it up
@teesvalley spotter: Please scroll down to end of this post and see NOTE 2 to get answer to your question.
@all-other-users:Although RB24 have yesterday added rbfeeder for Bullseye to their repository and install-script, but unfortunately missed adding mlat-client package to their Bullseye repository.
Hopefully they will add it soon, and then you can simply install it by following command
sudo apt install mlat-client
Currently the above command gives following output:
E: Unable to locate package mlat-client
You have 3 options:
OPTION-1: Wait till RB24 adds mlat-client to their Bullseye repository
OPTION-2: Build mlat-client on your RPi from source-code - This requires installation of many building-tool packages on your RPi.
OPTION-3: Install it from my Github site. This is fast & does not require installing any building-tool packages on your RPi. Please go to page linked below and use following option:
(1) Package for Raspi OS BULLSEYE (32-bit)https://github.com/abcd567a/mlat-client-package/blob/master/README.md
NOTE:(1) After installing mlat-client, do not forget to restart rbfeeder by following command:
sudo systemctl restart rbfeeder
(2) You have to set your receiver's Latitude, longitude and altitude (above sea level, in meters) in file /etc/rbfeeder.ini (please see screenshot below). Mlat wont work without setting these parameters.
sudo nano /etc/rbfeeder.ini