anything
AirNav RadarBox
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
 


Author Topic: Installing RadarBox after installing FlightRadar24  (Read 1808 times)

0 Members and 1 Guest are viewing this topic.

ColoradosFlightMan

  • New Member
  • *
  • Posts: 1
Installing RadarBox after installing FlightRadar24
« on: June 22, 2021, 09:43:55 PM »
I have had FlightRadar24 installed and running for a few months now and would like to add RadarBox as well. I use a raspberry pi 4 with a DVB-T dongle. I put in sudo bash -c "$(wget -O - http://apt.rb24.com/inst_rbfeeder.sh)" using PuTTY for RadarBox and can't seem to find the next steps I should take to get it working. I know from my DUMP1090 that FlightRadar24 is still working. Can anyone help me? Thank you

anorak

  • Hero Member
  • *****
  • Posts: 977
  • support The Devon Air Ambulance Trust
Re: Installing RadarBox after installing FlightRadar24
« Reply #1 on: June 23, 2021, 08:12:09 AM »
Morning, in case you haven`t seen this,
https://forum.radarbox24.com/index.php?topic=10201.0
If that doesn`t work I`m sure abcd567 or some one else will be along soon.
Good luck, Dave.
Dave. Exmoor, North Devon.

Runway 31

  • Moderator
  • Hero Member
  • *****
  • Posts: 33510
Re: Installing RadarBox after installing FlightRadar24
« Reply #2 on: June 24, 2021, 09:39:28 AM »
Hi

This video may help you https://www.radarbox.com/sharing-data

This page guides you throughtthe process https://www.radarbox.com/raspberry-pi

Alan