AirNav Radar
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
 


Author Topic: rbfeeder receives dump1090-fa, but isn't sending anything to Radarbox  (Read 13783 times)

0 Members and 1 Guest are viewing this topic.

wooter

  • New Member
  • *
  • Posts: 6
I have an odd one here.

My rbfeeder setup went smoothly, and airplane positions show up in /var/log/rbfeeder.log, but my Sharing Key is not found in RadarBox, and according to rbfeeder.log no packets are sent.

 A snapshot from rbfeeder.log:

Code: [Select]
2021-05-21 16:44:07]  Starting RBFeeder Version 0.4.1 (build 20210414164501)
[2021-05-21 16:44:07]  Using configuration file: /etc/rbfeeder.ini
[2021-05-21 16:44:07]  Network-mode enabled.
[2021-05-21 16:44:07]  Remote host to fetch data: 127.0.0.1
[2021-05-21 16:44:07]  Remote port: 30005
[2021-05-21 16:44:07]  Remote protocol: BEAST
[2021-05-21 16:44:07]  System: rblc2
[2021-05-21 16:44:07]  Start date/time: 2021-05-21 16:44:07
[2021-05-21 16:44:07]  Socket for ANRB created. Waiting for connections on port 32088
[2021-05-21 16:44:09]  Connection established.
[2021-05-21 16:44:10]  [471F6E] P: 20620.646 vtas: 456.000 vias: 245.000 Alt: 38025 mach: 0.776 VTAS: 456.000 VTAS2: 234.586 Temp: 227.401 (-45.749 C) Temp 2: -50.377 Temp 3: -25.084
[2021-05-21 16:44:13]  [471F6E] P: 20620.646 vtas: 456.000 vias: 245.000 Alt: 38025 mach: 0.776 VTAS: 456.000 VTAS2: 234.586 Temp: 227.401 (-45.749 C) Temp 2: -50.377 Temp 3: -25.084
[2021-05-21 16:44:16]  [471F6E] P: 20620.646 vtas: 456.000 vias: 245.000 Alt: 38025 mach: 0.776 VTAS: 456.000 VTAS2: 234.586 Temp: 227.401 (-45.749 C) Temp 2: -50.377 Temp 3: -25.084
[2021-05-21 16:44:19]  Could not start connection. Timeout.
[2021-05-21 16:44:19]  [471F6E] P: 20620.646 vtas: 456.000 vias: 245.000 Alt: 38025 mach: 0.776 VTAS: 456.000 VTAS2: 234.586 Temp: 227.401 (-45.749 C) Temp 2: -50.377 Temp 3: -25.084
[...]
[2021-05-21 16:44:37]  ******** Statistics updated every 30 seconds ********
[2021-05-21 16:44:37]  Packets sent in the last 30 seconds: 0, Total packets sent since startup: 0
[2021-05-21 16:44:37]  Data sent: 50 B
[2021-05-21 16:44:37]  Data received: 0 B
[...]

This "Connection established" and "Could not start connection. Timeout." happens in regular intervals, and each 30s the statistics are shown that there are 0 packets sent.

So to me it looks dump1090 is working fine, rbfeeder is receiving its data but no packets are sent to RB.

Any clues where I should be looking? The RPi resolves radarbox24.com and radarbox.com

abcd567

  • Hero Member
  • *****
  • Posts: 890
  • CYYZ - Toronto
Did you claim your station?

If not, then to claim, please follow instructions here:

https://www.radarbox.com/raspberry-pi/claim


.

wooter

  • New Member
  • *
  • Posts: 6
When trying to claim, I get the error "Sharing Key not found".

I assume this is because rpfeeder hasn't been able to connect to RadarBox yet to publish the key.

abcd567

  • Hero Member
  • *****
  • Posts: 890
  • CYYZ - Toronto
Reboot the Pi and check if key has been obtained.

The latest version of rbfeeder (0.4.1-20210414164501), fails to start/restart by systemd command "sudo systemctl restart rbfeeder", and and hence fails to obtain the key. The only way left to restart rbfeeder is to Reboot the Pi (sudo reboot).

.
« Last Edit: May 21, 2021, 09:24:52 PM by abcd567 »

wooter

  • New Member
  • *
  • Posts: 6
I'm sorry, but that didn't do anything either.

I keep seeing these messages, even after rebooting:

Code: [Select]
[2021-05-22 10:01:13]  Connection established.
[..]
[2021-05-22 10:01:18]  ******** Statistics updated every 30 seconds ********
[2021-05-22 10:01:18]  Packets sent in the last 30 seconds: 0, Total packets sent since startup: 0
[2021-05-22 10:01:18]  Data sent: 29.4 KB
[2021-05-22 10:01:18]  Data received: 0 B
[..]
[2021-05-22 10:01:23]  Could not start connection. Timeout.

And the Sharing Key is still not found to claim my RPi.

Any other ideas? :)

Runway 31

  • Moderator
  • Hero Member
  • *****
  • Posts: 34099
Try contacting [email protected] for advice

Alan

abcd567

  • Hero Member
  • *****
  • Posts: 890
  • CYYZ - Toronto
And the Sharing Key is still not found to claim my RPi.

Does the output of this command not show the key?

Code: [Select]

sudo rbfeeder --showkey --no-start 



You can find the key by following command also:

Code: [Select]

cat /etc/rbfeeder.ini


wooter

  • New Member
  • *
  • Posts: 6
That command shows the key.

But the key is not recognised on the Radarbox website.

abcd567

  • Hero Member
  • *****
  • Posts: 890
  • CYYZ - Toronto
Try this:

First delete the file /etc/rbfeeder.ini and purge the installed rbfeeder by following commands
Code: [Select]
sudo rm /etc/rbfeeder.ini

sudo apt-get purge rbfeeder 

sudo reboot 



After reboot Install rbfeeder again, and get new key.
Code: [Select]

sudo apt-get install rbfeeder

sudo rbfeeder --showkey --no-start   


Now try to claim using new key.


.


« Last Edit: May 22, 2021, 11:07:45 AM by abcd567 »

wooter

  • New Member
  • *
  • Posts: 6
Followed that, no change. Still the same behaviour, and the new key is also not recognised by Radarbox.

abcd567

  • Hero Member
  • *****
  • Posts: 890
  • CYYZ - Toronto
As already suggested by Alan, try contacting [email protected] for advice

AirNav Support

  • AirNav Systems
  • Hero Member
  • *****
  • Posts: 4127
There is some sharing key issues that have been escalated to our development team.
Contact Customer/Technical support via:
http://www.airnavsystems.com/contact.html
[email protected]

nbarros

  • New Member
  • *
  • Posts: 1
I’m +1 with this issue, my setup seems ok (with 1090-fa feeds FA, Fr24, PlaneFinder) but the key is not accepted by the radarbox claim page. Lost count of how many abcd567’s troubleshooting posts I read after so many google searches. Following up with the thread.

Runway 31

  • Moderator
  • Hero Member
  • *****
  • Posts: 34099
See previous post, there is an issue with keys which has been passed to the developers for correction

Alan

efece

  • New Member
  • *
  • Posts: 1
Any updates on this bug?
Still unable to upload my data and finish the claim process.

Code: [Select]
[2021-05-27 09:14:09]  [A38C95] P: 47039617051387033513099264.000        vtas: 440.000   vias: 250.000  Alt: 35850       mach: 0.756     VTAS: 440.000 VTAS2: 226.355   Temp: 223.074 (-50.076 C)       Temp 2: -50.377         Temp 3: -1.008
[2021-05-27 09:14:09]  [A57A1D] P: 71549210994628537612238848.000        vtas: 484.000   vias: 323.000  Alt: 26750       mach: 0.796     VTAS: 484.000 VTAS2: 248.991   Temp: 243.473 (-29.677 C)       Temp 2: -50.377         Temp 3: 136.617
[2021-05-27 09:14:10]  Could not start connection. Timeout.