anything
AirNav RadarBox
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
 


Author Topic: Altitude values  (Read 201 times)

0 Members and 1 Guest are viewing this topic.

gcopter1

  • New Member
  • *
  • Posts: 27
Altitude values
« on: January 08, 2021, 09:22:35 PM »
I'm trying to enter, in the quick filter area, an altitude of <4,000 ft. in order to display nearby aircraft flying at or below that altitude.

Problem is, whenever I start typing, the box where the value is entered, immediately auto populates some crazy value way above my desired input.

Just how would I enter 4,000 feet?

For example, when I start typing "4", the value box immediately adds four zeroes and I end up with 40000.

Typing 4000, and pressing the "Filter" button, I still end up in the aircraft list, with flights well above 4000.

Runway 31

  • Moderator
  • Hero Member
  • *****
  • Posts: 29858
Re: Altitude values
« Reply #1 on: January 08, 2021, 09:39:54 PM »
Try doing it through Advanced Filters where you can set through base and top

See attached

Alan

gcopter1

  • New Member
  • *
  • Posts: 27
Re: Altitude values
« Reply #2 on: January 08, 2021, 09:51:28 PM »
I'm aware of that one as well. I wanted to use the one above the display where I can see the flight info, as in the picture.

The advanced filter I've enabled already to reduce clutter in my map.

Want to do the same to reduce clutter in the list.

gcopter1

  • New Member
  • *
  • Posts: 27
Re: Altitude values
« Reply #3 on: January 08, 2021, 09:55:40 PM »
Think I finally figured it out.

I need to lead the entry with a "0".

In example, for an altitude of 4,000, I enter 04000.

Runway 31

  • Moderator
  • Hero Member
  • *****
  • Posts: 29858
Re: Altitude values
« Reply #4 on: January 09, 2021, 10:24:14 AM »
Well done.  In case you are interested you can download logos etc from Rods download page http://www.rodbearden.com/RadarBox/Downloads.htm

Alan

gcopter1

  • New Member
  • *
  • Posts: 27
Re: Altitude values
« Reply #5 on: January 09, 2021, 07:20:22 PM »
Thanks.