HOW TO ACTIVATE THE MLAT FOR RADARBOX24

[abcd567]

@aps

Station numbers starting with:
EXTSHA are Windows Feeder
EXTRPI are RPi Feeder

As your station number is EXTSHA195185, you are Windows Feeder, and as Alan has already told, you cannot have MLAT activated.

[Hanno31]

Hallo zusammen, wie kann ich bei der Radarbox Extreme 2 die Koordinaten einstellen damit MLAT funktioniert.
Ich komme nicht an die Einstellung.
PGANRB500901

[Runway 31]

Klicken Sie im linken Raster unter Ihrer Stationsnummer auf die Stelle, an der sie steht. Klicken Sie hier, um Ihren Standort zu bearbeiten, und geben Sie dann Ihren Standort Lat / Lon ein

Alan

[Runway 31]

Wenn Sie nicht sehen können Klicken Sie hier, um Ihren Standort zu bearbeiten. Wenden Sie sich an [email protected] und bitten Sie ihn, den Empfänger PGANRB500901 mit Ihrem Konto zu verknüpfen. Sobald sie das getan haben, werden Sie es sehen können

Alan

[Hanno31]

Erledigt, der Support musste mich erst mit dem Account und der Box zusammen legen .

Dankeschön


.

[Runway 31]

Kein Problem, ich habe festgestellt, dass Sie Ihren Standort geändert haben

Alan

[VE4REM]

I AM ALSO HAVING AN ISSUE WITH THE MLAT ON THE XRANGE2 RECEIVER.
SHOWS AUTO START MLAT ON IN THE SETTINGS BUT SAYS MLAT INACTIVE ON MY MAP SCREEN,TRIED ENTERING LAT AND LONG,TRIED WITH STREET.
HAVE NO ISSUES ENTERING THE INFO THE UNIT SEEMS TO TAKE IT,BUT STILL SHOWS MLAT INACTIVE SEE INSTRUCTIONS.
UNIT ID IS-PGANRB501521.

[Runway 31]

Click on EDIT beside your location and enter the exact lat/lon in decimal, click Preview then Save

Alan

[VE4REM]

SO WOULD I ENTER IT LIKE THIS
LAT 53.8219  LONG -101.2531

[Runway 31]

Yes, I use Google Earth to find the exact lat/lon.  The lat/lon given gives an address in The Pas

Alan

[VE4REM]

ok thanks,i used my gps for the location.
still shows mlat inactive,and yes i am in the pas manitoba.
the mlat on my fr24 receiver works ok.
thanks again will try and figure it out.

[Runway 31]

It certainly shows your location correctly.  I presume that your receiver is linked to your account ok.

I would suggest you ask support for advice as setting the location through Edit is usually all that is required

Alan

[VE4REM]

WILL DO THANKS
RANDY
VE4REM

[Greytech]

A couple of months ago my MLAT stopped working for no apparent reason. I have been an uploader since May 2021 and changed nothing. I sent logs and data to support, no response. Anyway I found a post on this site that solved my MLAT problem, I hope this helps someone else. It would appear this is a software problem that has existed for over a year.
https://forum.radarbox24.com/index.php?topic=104371.msg487421#msg487421

[Runway 31]

Re-boot required to testart theMLAT client

Alan