AirNav RadarBox and RadarBox24.com > AirNav RadarBox and RadarBox24.com Discussion

HOW TO ACTIVATE THE MLAT FOR RADARBOX24

(1/11) > >>

medlege:
Hello to all of you !

Please can you help me in order to activate the MLAT for my EXTRPI feeder ?
I have specified the exact GPS coordinates and altitude above ground using the "See instructions" link in the stats page but the MLAT is still inactive.
How to check if the MLAT client is installed ?

Once again thank you very much in advance for your kind help.
Regards.

Runway 31:
If it is installed it will state MLAT active on the status.  What is your station number

 Try run "apt-get update -y; apt-get install mlat-client -y; reboot" then setup the Lon and Lat in your station id profile and then will be MLAT ready


Alan

medlege:
Hello Runway31 and thanks for your help.

I followed your instructions but got an error message and could not make it installed.
I am not a linux expert at all and maybe this is due to an old package distribution.
Please see the logs enclosed...
Do you have any clue what to do ?

Regards.

Runway 31:
Means nothing to me. just gave advice given on another thread which installed the MLAT..  Jessie maybe an old package that doesn't work with that.

Maybe a Linux guru will pass by with some advice

Alan

medlege:
Ok thanks again and well noted.

Maybe a linux guru will show !
As you said Jessie is old.

Regards.

Navigation

[0] Message Index

[#] Next page