I CAN'T INSTALL RBFEEDER ON MY Pi24 RASPBERRY

[medlege]

I think rbfeeder is installed now please can you confirm me !!

When I want to show my rbfeeder key I have this message even though I can see a key in the putty log.

Can you check the log please !
Now how to claim my Pi on the RADARBOX24 site ?

Thank you

[wiedehopf]

Let's check your fr24 configuration:

cat /etc/fr24feed.ini

[medlege]

Yes here it is:

cat /etc/fr24feed.ini
receiver="dvbt"
bs="yes"
raw="yes"
logmode="2"
windowmode="0"
mpx="no"
mlat="yes"
mlat-without-gps="yes"

[wiedehopf]

Then you didn't completely follow the guide for the pi24 image ;)

You need to configure fr24feed via the local pi webpage.


Be sure RAW DATA, SBS-Feed and "Decoded Data" are set to NO as well.
(The lat and long and gain settings are optional though)

[medlege]

Oh excuse me you are right...

Linux is very complicated LOL !!

I put NO in the settings page of FR24 for:
→ RAW data (30002/30334)
→ SBS Feed (10001)
→ Decoded data (30003)

Thank you again now what should I do please ?

[wiedehopf]

You need to add the --net option in the red box. (the rest of options you don't need)
So in the "Process arguments" box should be:

Code: [Select]

--net


After doing that reboot the pi and check again for a feed key.

Via that box you can also change the gain as shown in the picture. (If you ever want to do that)

[MDA]

Installed and running.
Congratulations !
https://www.radarbox24.com/stations/EXTRPI001353

[medlege]

Hello to everyone !!

I am very very happy I finally completed the installation and claimed my Pi !! I am online now !
I'm now feeding data to Radarbox24 thanks to you !
I would like to thank you a lot because without your help I would never have made it !!
Thank you so much a lot again to all of you for your help and precious support !
Now I will try to install Flightaware to have the 3 working together on my Pie !

So the main problem was that my Pi24 version was really too old ?! Outdated ?!
One last question please how to see the log like the FR24 tail -f /var/log/fr24feed/fr24feed.log ?

Best regards !!!

[medlege]

@MDA how did you see me so quickly !!!

LoL !!

[abcd567]

@medlege
@wiedehopf

I made the settings screenshot posted above sometimes ago when I was not aware of ver 1.14's mlat incapability.

Please do NOT use the settings which has "--net-bi-port 30104" as this will mix FA mlat feedback to main feed, and again feed to all sites. This is because PI24 installs dump1090-mutability ver 1.14, which is NOT mlat capable.


Please see Bake A Pi Option 4, FR24 configuration where it says:

Step 4.3 - Enter your additional dump1090 arguments or leave empty
$:   --net    --gain  -10    --lat  xx.xxxx   --lon  yy.yyyy

Below is the latest one I have made recently.

[wiedehopf]

So the main problem was that my Pi24 version was really too old ?! Outdated ?!

FR24 doesn't update their software particularly well.

Starting from a piaware sd-card image or a generic Raspbian Stretch Lite image is much better.

You might still want to do that :)

[medlege]

Ah Ok I understand ! I will keep the Pi like this for the moment.
So when we updated the Rapsbian it was Ok then.
Please how do you see the lo like in the FR24 tail -f /var/log/fr24feed/fr24feed.log ?

Now I would like to install Flightaware feeder so I just go on their website and install the just the feeder ?
I would like to have the 3 working on the same Pi.

Thank you !!

[MDA]

@ medlege
Please think about feeding adsbexchange.

[medlege]

OK no problem as I told you I really do not master linux at all but yes I will make it of course !
With your help I will make it !

The next step for me is to install Flightaware.
How did you noticed me so quickly on the network of feeders !!

Thanks and regards !

[medlege]

Excuse me but do you know how to reach the Radarbox24 browser Pi setting page like for FR24 → piaddress:8754 ?
And how do you acces the map page with radarbox24 like FR24 → Piaddress/dump1090/gmap.html ?

Please can you help me with this ?

Thanks.