Serial number for Flight stick

[N9NWO]

Have not found a serial number for the Flight stick

also having problems getting it to work on Windows 10

[Runway 31]

Which serial number are you looking for and what do you require it for.  Other than stating you are having problems getting it to work on W10 you don't give any info on what the problems are that you are having

In addition to downloading the V6 software did you also download the drivers http://www.airnavsystems.com/Download/ANRB/Drivers/microRadarbox-Drivers-20150411.exe

Don't install the V6 software to program files, install to somewhere like c:\Airnav

Alan

[MDA]

Have not found a serial number for the Flight stick

also having problems getting it to work on Windows 10

Did you red this? https://www.airnavsystems.com/forum/index.php?topic=19831.msg387241#new
Everything described very clearly.

Marcin

[N9NWO]

I have read everything.

For example the home page I need my S/N to produce something like EXTRPI009244.  I do see one listed as "PP-dg or PP-DG" on the Indiana page.

Not sure if I am sharing or not.  The problem seems to be with drivers.  Thinking of moving over to R-Pi.

[Runway 31]

The receiver type gives the feeder number,  PP**** is coming from a Planeplotter feeder,  EXTRPI**** are coming from Raspberry Pi's using a variety of stick types,   PGANRB** are coming from x-range, comstation, original radarboxes or a flightstick using V6 software.  EXTSHA are being fed by a variety of feeder types using the radarbox feeder software. 

What software are you using with the flightstick to feed?  Are you using the V6 software, the drivers are needed in conjunction with the V6 software? 

If you have not already done so download and install the V6 Radarbox software from http://www.airnavsystems.com/download/ANRB/ANRB60002Setup.exe.  Install to c:\Airnav not the default location from the installer

Once you have done that download and install the drivers from http://www.airnavsystems.com/Download/ANRB/Drivers/microRadarbox-Drivers-20150411.exe

Connect the flightstick and start up the software with the computer connected to the internet and in addition to seeing the flights on the software you will be feeding onto RB24.

Any further issues, get back on to me

Alan