Author Topic: How to add logos (Read 5311 times)

AV61 · « **on:** December 30, 2013, 02:16:32 PM »

Hi

Can you please tell me how I can add a logo to individual aircraft

Thanks
Nick

Runway 31 · « **Reply #1 on:** December 30, 2013, 02:22:23 PM »

Name it the registration without and dashes such as GBUMP.bmp and place it in the logo folder.

There is every chance Rod has already done it so check out his logos at http://www.rodbearden.com/RadarBox/Downloads.htm and look to download and instal then into your log folder

Alan

neroon79 · « **Reply #2 on:** December 30, 2013, 02:23:59 PM »

In additiopn to Alan:

You can create your own logo: Size: 76x16pix to be saved as .bmp file in Logo Folder.
The filename is registration without dash/dashes EG: D-EITG logo shall be saved as DEITG.bmp

Note: Logo will only be shown if airframe is using its registration as flight id. If reg isn't used or not received no Logo will be shown. A tie-up with hex is currently not supported by ANRB software.

Just in case: An individual Silhouette (aiframe type) for each airframe is not supported by the software.

Logo folder is located: your directory\AirNav RadarBox\Data

HTH Ingo

AV61 · « **Reply #3 on:** December 30, 2013, 02:30:08 PM »

Thanks you've just answered my next question
The tie up with the hex code you mentioned is
There a way I can use the hex code as the trigger for the
Logo or does it have to be the flight number only

Nick

AV61 · « **Reply #4 on:** December 30, 2013, 02:31:08 PM »

Sorry misread your post
There is no tie up with hex code

Nick

neroon79 · « **Reply #5 on:** December 30, 2013, 02:36:51 PM »

I wish that would be possible concidering the small private airframe in my area. In many cases I don't receive the flight id's due to edgy reception. In many cases (sail) planes aren't using flight ids at all. For theses airframes it would be great to have a hex tie-up. For the commercial airplanes it wouldn't make any sence...

Maybe one day...

Ingo

Runway 31 · « **Reply #6 on:** December 30, 2013, 02:37:35 PM »

The logo is derived from the flight ID. The ICAO or IATA identifiers for airliners and for military aircraft etc, registration for business aircraft, private aircraft etc with registration as flight ID

Alan

neroon79 · « **Reply #7 on:** December 30, 2013, 02:38:58 PM »

No problem Nick. Sometimes the brain is just reading, that it wants te read...

Ingo

neroon79 · « **Reply #8 on:** December 30, 2013, 02:41:46 PM »

Hi Alan,
does theat mean, although no flight id is reveived a business airframe will show a logo if there is one in the logo folder with its reg in the dashless style?

Ingo

RodBearden · « **Reply #9 on:** December 30, 2013, 05:01:10 PM »

The full set of logo rules is here: http://www.airnavsystems.com/forum/index.php?topic=6514.msg71413#msg71413

Runway 31 · « **Reply #10 on:** December 30, 2013, 06:12:45 PM »

No Ingo the logo is derived from the flight ID so no flight ID, no logo.

Alan

neroon79 · « **Reply #11 on:** December 30, 2013, 06:59:03 PM »

Thanks Alan. That's what I've had in my grey cells.

Ingo

Author Topic: How to add logos (Read 5311 times)

AV61

How to add logos

Runway 31

Re: How to add logos

neroon79

Re: How to add logos

AV61

Re: How to add logos

AV61

Re: How to add logos

neroon79

Re: How to add logos

Runway 31

Re: How to add logos

neroon79

Re: How to add logos

neroon79

Re: How to add logos

RodBearden

Re: How to add logos

Runway 31

Re: How to add logos

neroon79

Re: How to add logos