Main Menu

Use of Radar Box

Started by flymee1939, April 06, 2013, 05:39:53 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

flymee1939

Does software have to be running to get RadarBox24?

ie Do you have to be getting local traffic with AirNav radar Box before you can get any link with RadarBox24?

My RadarBox24 wont link thro the accounts procedure for some reason.

flymee1939
Bring back all is forgiven!

neroon79

#1
If you haven't the box running there is no need to link in, because if nothing is received nothing is sent to the server, no Box link in is need. But it is possible that your problems may be caused by the current server problem, which doesn't seem to be fixed yet. But Airnav is the only one who can confirm that 100%. I had done the link in Procedures while at least one Box was off-line and it worked. As soon as the box was running the flight statistics were filled.

Ingo
Greetings from northern Germany, Ingo
11.75nm ESE of EDDV

SW: ANRB v5.00.072/6.01.001 on WIN10 64Bit Pro&Home
HW:
Ant.: DPD Productions ADS-B Vertical Outdoor Base Antenna
AMP: Kuhne electr. KU LNA 1090 A TM
Cable: 25m of ECOFLEX 15+
NB: Asus P53E 24/7 op.
PC: 28"4K + 24" Monitor
AirSpy mini @RPi3

Runway 31

Hi flymee, no you dont need a box to use RB24 ,just log on and register.

To link, have your box connected, go to Options/Account and where is asks for Radarbox user name and Radarbox password use the ones on the Radarbox start up which are on your CD sleeve.

Then press link Radarbox and away you go, or it should. 

You dont however need the box connected to access RB24.   You dont even need a box.

Alan

flymee1939

OK ingo

Will fire up my AirNav system and see if I can then Link.

flymee
Bring back all is forgiven!