Problem with hardware/software ?

[MIKE.UTD]

Hi,
Had my AirNav for nearly 2 years now with no problems but a few strange things have started to happen.
When I switch the box on each day the map is full screen with no my interface/flight info showing.
The airport outlines sometimes come on but intermittent ?
This has never happend before.
Can someone remind me how to save my viewing options (default for my inetrface on left outlines on, no traillines etc, nothing in manual that I can see).
Anyone else had these problems ?
Thanks.
Mike.

[bratters]

Hi Mike - I sometimes have similar problems where RB seems to forget everything and has its own ideas as to how your screen should look.

I have never been able to save a map that doesn't need adjusting for trailines and outlines which I prefer switched off. ON seems to be default. Try saving map as radar version - unless you use that set-up - that seems to work.

[abrad41]

Don't now if anyone has seen this before.

I have just had my RB running for about 3 hrs, when i looked at it, it said hardware not connected, strange I thought, had not problems before.  So I shut down the RB and restarted the software, still the same nothing on the the screen and saying hardware not connected. So I restarted my computer and now everyhting is working as it was.

Anyone got any ideas.

Andy

[bratters]

How many "problems" get resolved by re-booting PCs?

Sometimes it's just the way things are!

[mike L]

watch out for windows auto update it can up set things
  mike

[EMA]

Windows auto update is best left switched off.

[oldun666]

try leaving rb on the screen and disconnect the usb from the back of rb it seems to shock the rb back into life like a freeveiw box best of luck   jeff