anything
AirNav RadarBox
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
 


Author Topic: No ADS-B blues...  (Read 3100 times)

0 Members and 1 Guest are viewing this topic.

oceans777

  • Guest
No ADS-B blues...
« on: November 02, 2008, 08:38:13 PM »
I can now strongly recommend NOT disconnecting the BNC-male connector on your new expesnive, low-loss coaxial cable from the pre-amp bias-t/RB, then forgetting it's on the floor and accidentally crushing the connector and the end of the coax in a metal door hinge.

It does absolutely nothing to improve your coverage area.

This is KLAX monitoring, off air for a day or so for repairs.

 

AirNav Support

  • AirNav Systems
  • Hero Member
  • *****
  • Posts: 4127
Re: No ADS-B blues...
« Reply #1 on: November 02, 2008, 08:42:51 PM »
Sounds like a unfortunate accident, hope your back online soon.
Contact Customer/Technical support via:
http://www.airnavsystems.com/contact.html
[email protected]

RodBearden

  • Hero Member
  • *****
  • Posts: 9183
    • Rod's RadarBox Downloads
Re: No ADS-B blues...
« Reply #2 on: November 04, 2008, 12:41:29 AM »
I see you're back, John. Well done!

Is your range better now?

Rod
Rod

oceans777

  • Guest
Re: No ADS-B blues...
« Reply #3 on: November 04, 2008, 12:53:56 AM »
Hi Rod,

Yes back at last. I went from 60 feet of LMR-400 cable to 45 feet so no great increase in range that I can tell.

But it is WAY better than the crushed BNC and cable, tests prove :-)