no data ???

[dirkpitt]

I have had my pi 3b+ working great last few yrs  no issues till recently .
I feed radarbox24 and flightaware  using a green rtl .
For some reason  flightaware stopped working , sending anything back in late August .  and now radarbox has stopped . When i investigated i found that after a power outage my pi would not boot
I reinstalled OS (buster) reinstalled piaware and radarbox  and now im back online with Radarbox but not sending data ?????  flightaware is not recognizing my pi  but radarbox is ????? I have looked and it says they are running  but no data is being sent .   I am online with the pi as this is what I used to post this


[network]
mode=beast
external_port=30005
external_host=127.0.0.1

[mlat]
autostart_mlat=true
#mlat_cmd=/usr/bin/python3.5 /usr/bin/mlat-client

[dump978]
#dump978_enabled=true

[Runway 31]

Buster is an old OS, I suggest that you update your set up which should enable you to upgrade to the latest feeder software.  See reply 6 of this thread for info https://forum.radarbox24.com/index.php?topic=105521.0

Alan

[abcd567]

Buster is an old OS, I suggest that you update your set up which should enable you to upgrade to the latest feeder software.  See reply 6 of this thread for info https://forum.radarbox24.com/index.php?topic=105521.0

Alan

I think you got some mixup.
BUSTER is the current image for Raspberry Pi.
The STRETCH and JESSIE are the outdated ones.

[abcd567]

now im back online with Radarbox but not sending data ?????  flightaware is not recognizing my pi  but radarbox is ????? I have looked and it says they are running  but no data is being sent .   I am online with the pi as this is what I used to post this


[network]
mode=beast
external_port=30005
external_host=127.0.0.1

[mlat]
autostart_mlat=true
#mlat_cmd=/usr/bin/python3.5 /usr/bin/mlat-client

[dump978]
#dump978_enabled=true

You are missing the entire [client] part in your config file.
The [client] part contains feeder key. Without feeder key no data will be sent to RadarBox24.

Below is the full config file

Code: [Select]

sudo nano /etc/rbfeeder.ini 

[client]
network_mode=true
log_file=/var/log/rbfeeder.log
disable_log=1

key=xxxxxxxxxxxxxxxxxxxxxxxxxxx
sn=EXTRPI00xxxx

lat=xx.xxxxxx
lon=-yy.yyyyy
alt=zzz

sat_used=0
sat_visible=0

[network]
mode=beast
external_port=30005
external_host=127.0.0.1

[mlat]
autostart_mlat=true
#mlat_cmd=/usr/bin/python3.5 /usr/bin/mlat-client

[dump978]
#dump978_enabled=true

[Runway 31]

Thanks abcd, my bad confusion

Alan