Radarbox1 Detected, Radarbox2 Not Detected...Purpose of this?

Started by CYYZGUY, April 08, 2015, 06:17:06 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

CYYZGUY

I cannot recall if this has been asked before, but as we all know, when radarbox starts up, it detects the one box, then tries to detect a second box.

Have we ever been given an explanation as to what this is for?  Is there some benefit to adding a second radarbox?

Airnav, can you explain the functionality behind this?

Jason
2 Nm North from Canada's Busiest Airport CYYZ

DPD 1090 Mhz Antenna with LMR-400 Cable
Antenna 35 Feet (11 Meters) standing tall
Dedicated Airnav Station with 16 Gigs ram
Dedicated Radarbox24 Station with 16 Gigs ram
40" LED Monitor
40" LED Monitor
BCD996XT, BCT15X, BCT15X, BCT15 and BCD436 receiver

Runway 31

I believe it states RB1 found and nothing else, at least that what it does with mine.

Alan

CYYZGUY

I will check mine tonight, but I am sure it tries to detect a second box...when the new software was released some time ago, I know this was mentioned somewhere.  I will grab a screen shot tonight when I get home, only 14:20 here right now.
2 Nm North from Canada's Busiest Airport CYYZ

DPD 1090 Mhz Antenna with LMR-400 Cable
Antenna 35 Feet (11 Meters) standing tall
Dedicated Airnav Station with 16 Gigs ram
Dedicated Radarbox24 Station with 16 Gigs ram
40" LED Monitor
40" LED Monitor
BCD996XT, BCT15X, BCT15X, BCT15 and BCD436 receiver

Runway 31

Yes it did at the time but hasn't since the last release.  Just closed down and restarted to check.

Alan

CYYZGUY

Ahh ok, I never bothered to update radarbox to the very last update when it came out as everything was working fine for me.  I will just leave well enough alone!

Thank you!
2 Nm North from Canada's Busiest Airport CYYZ

DPD 1090 Mhz Antenna with LMR-400 Cable
Antenna 35 Feet (11 Meters) standing tall
Dedicated Airnav Station with 16 Gigs ram
Dedicated Radarbox24 Station with 16 Gigs ram
40" LED Monitor
40" LED Monitor
BCD996XT, BCT15X, BCT15X, BCT15 and BCD436 receiver

oliver14

Maybe RB2 is going to be the new Micro radarbox !! whenever that is released.

Undertaker

Wasn't RB2 the 3D version ? which mine isn't and it used to check for it now with the latest version it does not include RB2

Tony

Kenny

It detects my DVT-B as a RB2.  This DVT-B is normally use by SDR# to decode ACARS.

Kenny
ANRB 3km north of VTBD

neroon79

Hi Kenny

what is a DVT-B? I only know DVB-T (which stands for DigitalVideoBroadcast-Terrestrial).

My DVB-T stick is detected as micro radarbox not RB2. As Far as I know RB2 is something else and not released yet.

Ingo
Greetings from northern Germany, Ingo
11.75nm ESE of EDDV

SW: ANRB v5.00.072/6.01.001 on WIN10 64Bit Pro&Home
HW:
Ant.: DPD Productions ADS-B Vertical Outdoor Base Antenna
AMP: Kuhne electr. KU LNA 1090 A TM
Cable: 25m of ECOFLEX 15+
NB: Asus P53E 24/7 op.
PC: 28"4K + 24" Monitor
AirSpy mini @RPi3

Kenny

Quote from: neroon79 on April 14, 2015, 05:42:45 PM
Hi Kenny

what is a DVT-B? I only know DVB-T (which stands for DigitalVideoBroadcast-Terrestrial).

My DVB-T stick is detected as micro radarbox not RB2. As Far as I know RB2 is something else and not released yet.

Ingo

Hi,

Recheck again..  It detects my DVB-T dongle as "MiniRB"  However, there is no data when it enters main screen.  I have to exit RB program and SDR# to let SDR# get the DVB-T then start the RB program again.

Kenny
ANRB 3km north of VTBD