AirNav RadarBox
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
 


Author Topic: A mast to two antennas, is it possible.  (Read 2495 times)

0 Members and 1 Guest are viewing this topic.

gonz33

  • Jr. Member
  • **
  • Posts: 55
A mast to two antennas, is it possible.
« on: February 20, 2013, 01:23:08 AM »
Greetings, I want to know if I can use a tube mast to two antennas, one is for the air band (VHF 118.0 - 136.0 MHz), and the other is Rama Radar 5 dB, for my Airnav Radar box, thank you.

I'm going to use 50 ft cable LMR-400 for the Rama Radar 5 dB antenna.

neroon79

  • Hero Member
  • *****
  • Posts: 4657
Re: A mast to two antennas, is it possible.
« Reply #1 on: February 20, 2013, 04:44:49 AM »
Hi,
of course can you use the same mast tube for your Two antennas. But make sure, that the radar antenna is the one at the top of the pole.
The cable is ok, as the attenuation shall be at about 2dB for the 50 ft you planning to install.

Regards

Ingo
Greetings from northern Germany, Ingo
11.75nm ESE of EDDV

SW: ANRB v5.00.072/6.01.001 on WIN10 64Bit Pro&Home
HW:
Ant.: DPD Productions ADS-B Vertical Outdoor Base Antenna
AMP: Kuhne electr. KU LNA 1090 A TM
Cable: 25m of ECOFLEX 15+
NB: Asus P53E 24/7 op.
PC: 28"4K + 24" Monitor
AirSpy mini @RPi3