anything
AirNav RadarBox
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
 


Author Topic: Has anyone added a Band Pass filter to their radarbox?  (Read 5270 times)

0 Members and 1 Guest are viewing this topic.

CYYZGUY

  • Hero Member
  • *****
  • Posts: 1627
Has anyone added a Band Pass filter to their radarbox?
« on: February 07, 2013, 06:50:24 PM »
Following a thread over at Radioreference.com, some folks have added a band pass filter to their radarbox and have got dramatic results.  In terms of more range and greater sensitiveity of ADS-B signals.  I ordered one myself and it was delivered today..  It sure makes sense to filter out all the unwanted noise..

It operates between 980 to 1150 Mhz and has a centre frequency of 1065Mhz

Here is the link ..

http://www.minicircuits.com/pdfs/VBFZ-1065+.pdf

It just screws on to the back of the radarbox, and then your sma antenna connection into it.

Just throwing it out there for you guys to look at.

Here is the thread from radioreference...it starts around page 5 or 6

http://forums.radioreference.com/aircraft-data-decoding/169848-airnav-radarbox-paired-dpd-productions-ads-b-antenna-6.html

2 Nm North from Canada's Busiest Airport CYYZ

DPD 1090 Mhz Antenna with LMR-400 Cable
Antenna 35 Feet (11 Meters) standing tall
Dedicated Airnav Station with 16 Gigs ram
Dedicated Radarbox24 Station with 16 Gigs ram
40" LED Monitor
40" LED Monitor
BCD996XT, BCT15X, BCT15X, BCT15 and BCD436 receiver

Runway 31

  • Moderator
  • Hero Member
  • *****
  • Posts: 34071
Re: Has anyone added a Band Pass filter to their radarbox?
« Reply #1 on: February 07, 2013, 07:04:13 PM »
Let us know how you get on with it.

Alan

SteveJ

  • New Member
  • *
  • Posts: 15
Re: Has anyone added a Band Pass filter to their radarbox?
« Reply #2 on: February 07, 2013, 08:38:14 PM »
I think you misread the thread.  It appears only one person has purchased the filter.

If you're in a high noise environment with lots of rf around 1090Mhz, than the filter will be useful.  If you're not affected by noise, than the filter will actually degrade your signal by approximately 1.7dB due to insertion loss.

What you want to purchase is the LNA that Lindsay bought and install it near your antenna.

This is what you want: http://www.minicircuits.com/pdfs/ZRL-2400LN.pdf




CYYZGUY

  • Hero Member
  • *****
  • Posts: 1627
Re: Has anyone added a Band Pass filter to their radarbox?
« Reply #3 on: February 07, 2013, 11:28:24 PM »
That is exactly why I bought it.  I have the antenna mounted on the top of my apartment building and I get bombarded with alot of RF, especially being so close to the city of toronto.  So far in the last 2 hours, I have gained about 20Nm on my radar screen with flights I have never been able to see before.  And the number of aircraft I can see has also increased.  We are going through a blinding snowstorm at the moment as well, so I cannot wait until clear weather to see if there will be even more improvement.  Also, I think there would be more gain having less RF anyways.  The cleaner the signal, the better I would think.

regards,

« Last Edit: February 07, 2013, 11:30:44 PM by CYYZGUY »
2 Nm North from Canada's Busiest Airport CYYZ

DPD 1090 Mhz Antenna with LMR-400 Cable
Antenna 35 Feet (11 Meters) standing tall
Dedicated Airnav Station with 16 Gigs ram
Dedicated Radarbox24 Station with 16 Gigs ram
40" LED Monitor
40" LED Monitor
BCD996XT, BCT15X, BCT15X, BCT15 and BCD436 receiver

CoastGuardJon

  • Hero Member
  • *****
  • Posts: 1178
  • Mullion Cove, Kernow --- sw Cornwall UK.
Re: Has anyone added a Band Pass filter to their radarbox?
« Reply #4 on: February 10, 2013, 05:20:05 PM »
Hi CYYZGUY, can you tell us where you bought it, I can find all the spec. sheets etc., but haven't found a supplier (UK or US) as yet.    Many thanks in anticipation..................
ANRB :  AOR AR8000 : Icom R-7000 : Icom IC-R9000 : JRC NRD-545 : OptoElectronics Digital Scout and OptoLinx Interface; Realistic Pro-2005 : UBC 800XLT - listed in alphabetical order, not cost, preference, performance or entertainment value!

SteveJ

  • New Member
  • *
  • Posts: 15
Has anyone added a Band Pass filter to their radarbox?
« Reply #5 on: February 10, 2013, 07:24:29 PM »
You can buy it direct from Mini-Circuits.


CYYZGUY

  • Hero Member
  • *****
  • Posts: 1627
Re: Has anyone added a Band Pass filter to their radarbox?
« Reply #6 on: February 10, 2013, 09:03:26 PM »
Thanks Steve for chiming in.

Here is the direct link with specs...

http://www.minicircuits.com/pdfs/VBFZ-1065+.pdf

After a few days use, it has vastly improved my hits and my range has slightly increased.  I am pleased.

Jason
2 Nm North from Canada's Busiest Airport CYYZ

DPD 1090 Mhz Antenna with LMR-400 Cable
Antenna 35 Feet (11 Meters) standing tall
Dedicated Airnav Station with 16 Gigs ram
Dedicated Radarbox24 Station with 16 Gigs ram
40" LED Monitor
40" LED Monitor
BCD996XT, BCT15X, BCT15X, BCT15 and BCD436 receiver