This is the closest thread I could find for my question without starting a new one, so here goes:
My AirNav RB came about 2 months ago with an included Moonraker Radar-Rama external antenna.
Came with no cable or instructions, so dumped it in back of garage and lived with included 'stock' internal aerial instead.
Am now hooked and wanted to extend my Polar Diagram, so ordered a new external antenna and cable assembly.
Messed up on two scores:
1) I thought I was ordering cable and antenna - turns out I had just ordered cable assembly
2) I grossly underestimated the length of cable I would need!
Thankfully my new cable assembly is fully compatible with my mothballed antenna.
So that is problem 1 solved - currently stuffed outside bay window and working as a test... (although probably less signals than stock aerial...)
Have a problem with my underestimated 10m Westflex103 cable though:
Am in two minds as to whether to erect my external setup as a DIY project or get it done professionally.
Whichever route I take, it is going to have to be mounted slightly lower than the apex of my upstairs neigbour's flat as originally planned.
My rough calculations work out that my installation will be about 1 metre away from another neighbours UHF television aerial.
I can live with their aerial blocking my signal BUT don't want to start a riot with them if my new setup blocks their telly viewing!
Any advice/thoughts/experience/feedback much appreciated before I proceed and alienate myself from neighbours!
Cheers
Chris