v3.02 beta - ANRB crash - two port 7879 connections

[tarbat]

ANRB stops responding and crashes as soon as I try to connect TWO programs to port 7879.

Scenario 1:
Run ANRB - ok
Run Planeplotter - ok
Run MilModeSLogger - ANRB crashes

Scenario 2:
Run ANRB - ok
Run MilModeSLogger - ok
Run Planeplotter - ANRB crashes

Running Planeplotter on port 30003 and MilModeSLogger on port 7879, and ANRB does NOT crash.

I've reverted to v3.01 until this can be fixed.

[lennox2604]

Same Problem with me

Will NOT run 2 programmes in 7879 or 30003
ie
Jstars and Winsend

Back to 3.01

[Allocator]

Can't even run one program (JSTARS) with RB V3.02 accessing port 30003 I'm afraid.

Either RB freezes, or it shuts down after I click 'connect' on the JSTARS interface.

I've tried this with and without Network traffic selected and it is the same.

[abrad41]

Hi

I have got the same problem as Allocator - After clicking `connect` on the JSTARS interface RB crashes - after shutting JSTARS, RB comes back on its own.

Andy

[Allocator]

Same effect using Windows Hyperterminal connecting to port 30003 too - except I don't get RB coming back - it just disappears as it did with JSTARS.

I'll try again with Hyperterminal and port 7879.

[Allocator]

OK, Hyperterminal works fine with port 7879 (single connection) and the data is delayed 5 minutes.

Disconnected port 7879 and connected port 30003 and RB shuts down immediately.

[tarbat]

Fixed in the latest version of 3.02beta.

[lennox2604]

Seems OK in latest beta can run Jstars and Winsend

JC