AirNav RadarBox
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
 


Author Topic: whats the best refresh rate to use?  (Read 9338 times)

0 Members and 1 Guest are viewing this topic.

lovemuscle

  • New Member
  • *
  • Posts: 21
  • location stafford
whats the best refresh rate to use?
« on: July 14, 2009, 09:02:21 AM »
Just wondered what the best refresh rate is to use,i wonder what all you experienced member are using?

Is there any disadvantage to using the fastest refresh rate ie 100ms.

thanks in advance Gary

AirNav Support

  • AirNav Systems
  • Hero Member
  • *****
  • Posts: 4127
Re: whats the best refresh rate to use?
« Reply #1 on: July 14, 2009, 09:06:54 AM »
Thats probally "overkill". ADS-B messages are sent twice every second.

So 500ms would be fine, though it also depends whether your computer can handle the load.
Contact Customer/Technical support via:
http://www.airnavsystems.com/contact.html
[email protected]

tarbat

  • ShipTrax Beta Testers
  • Hero Member
  • *
  • Posts: 4219
    • Radarbox at Easter Ross
Re: whats the best refresh rate to use?
« Reply #2 on: July 14, 2009, 09:58:53 AM »
ATC radar screens typicaly update every 4 seconds I think.  So I use 4000ms for a more realistic simulation of real ATC radar.

lovemuscle

  • New Member
  • *
  • Posts: 21
  • location stafford
Re: whats the best refresh rate to use?
« Reply #3 on: July 14, 2009, 10:18:15 AM »
ummm interesting,i would of thought they would update faster than that,might give it a go,cost nothing.:)

Spaice

  • Full Member
  • ***
  • Posts: 192
Re: whats the best refresh rate to use?
« Reply #4 on: July 14, 2009, 10:51:40 AM »
I have set my RB to 1000ms for refresh, you are right that it cost nothing, but it might have an impact on the resources of your computer.  I,m sure that if ATC could have a refresh rate higher than 4 seconds they would.

DaveReid

  • Hero Member
  • *****
  • Posts: 1815
    • Heathrow last 100 ADS-B arrivals
Re: whats the best refresh rate to use?
« Reply #5 on: July 14, 2009, 11:12:11 AM »
I'm sure that if ATC could have a refresh rate higher than 4 seconds they would.

You try spinning a massive PSR head at more than 15 rpm  :-)
This post has been scanned for any traces of negativity, bias, sarcasm and general anti-social behaviour

Deadcalm

  • Sr. Member
  • ****
  • Posts: 381
Re: whats the best refresh rate to use?
« Reply #6 on: July 14, 2009, 11:32:23 AM »
23cm radar - 6 sec update, 10cm radar 4 secs.

DC
Go around, I say again go around...

Spaice

  • Full Member
  • ***
  • Posts: 192
Re: whats the best refresh rate to use?
« Reply #7 on: July 14, 2009, 12:15:59 PM »
That was my point really, they are limited to 4 sec refresh because of technical limitation, however if they could spin the PSR head at a faster rate ATC would be very happy :)

malc41

  • RadarBox Beta Testers
  • Hero Member
  • *
  • Posts: 586
Re: whats the best refresh rate to use?
« Reply #8 on: July 14, 2009, 12:19:59 PM »
and would probably shake the tower/building to bits !
15 Miles East of EGNJ

atcukmatty

  • Jr. Member
  • **
  • Posts: 57
Re: whats the best refresh rate to use?
« Reply #9 on: July 14, 2009, 02:40:03 PM »
i study avionics at uni, i learnt all this this last year. If you have a high scanning speed and the pulse repetition frequency is low some targets may be missed becuase of the time interval between pulses. So if you want a high scanning speed it requires high PRF, and the more pulses transmitted per second means the display will be clearer and brighter (talking about PSR).
I went to air traffic control for my work experience a couple of years ago and im pretty sure it updated faster than 4 seconds.

malc41

  • RadarBox Beta Testers
  • Hero Member
  • *
  • Posts: 586
Re: whats the best refresh rate to use?
« Reply #10 on: July 14, 2009, 02:45:29 PM »
Terminal Airport Surveillance radar updates at 4.8 seconds (12.5 rpm antenna
rotation)

Airport surveillance and SSR usually at 4 seconds (15 rpm)

PAR < 1 sec

15 Miles East of EGNJ

FlyOverMe

  • Guest
Re: whats the best refresh rate to use?
« Reply #11 on: July 15, 2009, 01:26:33 AM »
Do the  ADS-B transponders on Aircraft respond to a ground based interrogation from radar? Or do they transmit independently at a regular interval?

FlyOverMe

  • Guest
Re: whats the best refresh rate to use?
« Reply #12 on: July 15, 2009, 01:30:15 AM »
I leave my RadarBox set at 4000ms

DaveReid

  • Hero Member
  • *****
  • Posts: 1815
    • Heathrow last 100 ADS-B arrivals
Re: whats the best refresh rate to use?
« Reply #13 on: July 15, 2009, 06:22:47 AM »
Do the  ADS-B transponders on Aircraft respond to a ground based interrogation from radar? Or do they transmit independently at a regular interval?

Both.
This post has been scanned for any traces of negativity, bias, sarcasm and general anti-social behaviour