AirNav Systems Forum
AirNav RadarBox and RadarBox24.com => AirNav RadarBox and RadarBox24.com Discussion => Topic started by: G8VXY on March 28, 2016, 12:46:26 PM
-
OK just hooked up the RB after a few years gathering dust...
Problem is to run it all the time it needs a dedicated pc running 24/7, also because it is a USB device it has to be close to the PC.
My ideal setup would be to move the RB as close to the antenna as possible (maybe even mount it in a masthead box), use something like a Raspberry PI, data processing and data storage with USB to the RB and ether net O/P, (You get very little signal lose in CAT5 cable).
Anyone done anything like this before???