AirNav Systems Forum

AirNav RadarBox and RadarBox24.com => AirNav RadarBox and RadarBox24.com Discussion => Topic started by: Luigi_YOW on March 27, 2016, 12:04:05 AM

Title: Radarbox Data Sharer 1.20 v.RB24120 Installation
Post by: Luigi_YOW on March 27, 2016, 12:04:05 AM
Need Help ?

My Radarbox Data Sharer 1.20 v.RB24120 has been installed and all parameters appears to be ok with the exception of the [Stats] which are all at "0" and this: [Input Port] : Not connected [yellow box].

I have a NESDR Mini SDR & DVB-T USB Stick (RTL2832 + R820T) and Antenna;
The Software packaged installed for this are:
-Zadig
-CubicSDR
-RTL 1090 IMU from: jetvision.de v. B:103, and finally:
-Radarbox Data Sharer 1.20 v.RB24120

I can see the data on traffic on my RTL 1090 but i cannot see it on my RadarBox Account and it does not appear to be share on RB24. The RTL 1090 TCP port is: 31001

What I am missing ?
What tweaking do i have to do to MS Windows 10 to get this data shared on RB24

Anybody ?
Thank for your time


Title: Re: Radarbox Data Sharer 1.20 v.RB24120 Installation
Post by: neroon79 on March 28, 2016, 11:25:18 AM
Hi Luigi,

sorry for the late reply. The sharing software needs the following in dump1090.bat:

--net-sbs-port 30003

The sharing software needs SBS Basestation compatible data stream on port 30003. Unfortunaltely other data format or other port won't work.

Ingo
Title: Re: Radarbox Data Sharer 1.20 v.RB24120 Installation
Post by: Runway 31 on March 30, 2016, 04:49:32 PM
Contact [email protected] for assistance
Title: Re: Radarbox Data Sharer 1.20 v.RB24120 Installation
Post by: neroon79 on March 30, 2016, 06:26:08 PM
Update:

If you want to use RTL1090.exe:

- close rtl1090.exe
- go to the folder were the RTL1090.exe is.
- Look for rtl1090.ini and open it.
- look for the folowing entry: cb130003=0
- replace the "0" with "1": cb130003=1
- save and close the rtl1090.ini
- open rtl1090.exe

Ingo
Title: Re: Radarbox Data Sharer 1.20 v.RB24120 Installation
Post by: big on April 04, 2016, 02:14:55 PM
...or use modesmixer...

for example

modesmixer2.exe  --inConnect 127.0.0.1:30005  --outServer msg:30003

Work perfect :)
Title: Re: Radarbox Data Sharer 1.20 v.RB24120 Installation
Post by: Kirill on May 18, 2020, 03:55:50 PM
My dump1090.bat
dump1090.exe --device-index 1 --gain 48 --net --interactive --net-bo-port 30005 --modeac --max-range 500 --fix --phase-enhance --metric
pause

All work