AirNav Systems Forum

AirNav RadarBox and RadarBox24.com => AirNav RadarBox and RadarBox24.com Discussion => Topic started by: simonb on January 19, 2015, 07:54:19 PM

Title: Radarbox re-install after hard disk failure
Post by: simonb on January 19, 2015, 07:54:19 PM
Hi all.my lap top hard drive crashed 2 weeks ago wiping everything off my computer.it is now repaired and have re loaded radarbox using the original CD from 2007.downloaded the upgrade to version 5.00.071 ok but I dont know if the database for aircraft,routes etc is up to date.aircraft list shows 80,100 and 1094 airlines.is this the latest one or do i need to download another update.using windows vista.thanks in advance for any help,regards,simon.
Title: Re: Radarbox re-install after hard disk failure
Post by: Runway 31 on January 19, 2015, 08:12:16 PM
Simon, you would be better to use 5.00.72 which is the latest on the support page
http://www.airnavsystems.com/download/ANRB/ANRB50072Setup.exe

If you go to File/Database explorer/Database Updates tab then Update all records press start update and you will see the progress bar along the bottom.  Once complete you will be advised to close down and restart and the processing will finish on starting up.  You should have 226.500 odd after the update.

Alan
Title: Re: Radarbox re-install after hard disk failure
Post by: simonb on January 19, 2015, 09:55:15 PM
Thanks for that Alan.upgraded no problem but after database update still shows 80100 in aircraft table,any ideas? ta,simon.
Title: Re: Radarbox re-install after hard disk failure
Post by: Runway 31 on January 19, 2015, 10:22:49 PM
That would suggest that the d/b update went to the old version and would also suggest that you have the old version on your laptop.  Either delete the old version or find the Navdata db3 file in the old version and drag it over to new version.

Personally I would delete all traces of the previous installations and reinstall the new version.  Don't install to programme files install to something like c:/Airnav

Alan
Title: Re: Radarbox re-install after hard disk failure
Post by: simonb on January 20, 2015, 01:47:14 PM
Many thanks Alan,seems to have done the trick.regards,simon.
Title: Re: Radarbox re-install after hard disk failure
Post by: Runway 31 on January 20, 2015, 02:12:45 PM
Glad to have been of assistance Simon

Alan
Title: Re: Radarbox re-install after hard disk failure
Post by: Paulc on February 21, 2015, 03:49:46 PM
Alan

sorry to add a similar request - new insallation on new laptop - i have done the updata database but sill only showing 80000 records in database explorers not the 240,000 as expected.

any suggestions ? Airnav not been on this laptop before
Title: Re: Radarbox re-install after hard disk failure
Post by: Runway 31 on February 21, 2015, 05:28:12 PM
Paul,

Have you done a search and found where the Navdata.db3 is?  If you have downloaded and installed the Navdata update and you are still only showing 80,000 you must have 2 Navdata.db3 files, the original file which the software is reading and the new one which has went somewhere else? 

Find the new one which should be around 66,275Kb in size.  It should be in c:\Airnav Radarbox\data\ if you followed 5.00.72's default install.


Alan
Title: Re: Radarbox re-install after hard disk failure
Post by: Paulc on February 23, 2015, 07:43:57 AM
Thanks alan - will give that a try. Default installation put in in programme files though.
Title: Re: Radarbox re-install after hard disk failure
Post by: Runway 31 on February 23, 2015, 08:03:47 AM
It shouldn't Paul, 5.00.72 default should be outwith program files.  I would suggest that you delete the installation and manually remove everything left after the automatic removal and the install as detailed in my previous reply.

Alan
Title: Re: Radarbox re-install after hard disk failure
Post by: Runway 31 on February 26, 2015, 12:10:08 PM
Paul,

Have you got it up and running yet

Alan