AirNav Systems Forum
AirNav RadarBox and RadarBox24.com => AirNav RadarBox and RadarBox24.com Discussion => Topic started by: FACTflights on August 02, 2012, 04:49:11 PM
-
Help, I've lost the little aircraft and the data that goes at the end of the trail lines.
-
Hi FACTflights
I think you need File...Preferences and the options down the left side of the first (General) tab. You get the little aircraft by unchecking "Square Label".
HTH
Rod
-
Hello Rod,
Square label is not checked.
John
-
Go to "File"
then select "Preferences"
under sub menu "General", frame section "Label" tick/untick" the following:
-untick Square Label
-check font and font size
If you have too many airframes in an area, all label -containing the flight number, registration and altitude, rate of descend, speed- will disappear, to keep the radar screen "readable". If you zoom in the map to get a lower airframe per area rate the labels should reappear. As far as I know, there is no option integrated to fully remove the appearance of this data-labels.
Next time please be more specific with your problem. Because the way you state your question was on the edge to require mind-reading capabilities.
-
Square label is not checked.
In this case, have you tried a re-start of the Software and your whole machine?
-
Thanks guys,
You guys put me on the right track.
Found it, butter fingers changed the font.
Only "Terminal" seems to work correctly.
Font size was not changed.
I found it by firing up the old 32 bit computer and comparing notes.