AirNav Systems Forum
AirNav RadarBox and RadarBox24.com => AirNav RadarBox and RadarBox24.com Discussion => Topic started by: nicky32 on May 21, 2011, 08:17:31 PM
-
i bought a radar box off a freind and unsure how to get it working the radar comes up but its empty and my freind said something about updating the software on the airnav box can somebody help me plz
-
Have you installed the drivers for RadarBox?
-
yes but where its syas the hardware bit connection is on the map at the bottom it says unconnected
-
Is the box in the bottom left hand corner ( process hardware flights)ticked?
And welcome to the forum, everyone is really good and will always help.
Dave.
-
Hi dave thanx for the welcome when i tick the box it says the subscription or something has expired
-
That should be for the network, hardware flights are those that you receive on your kit.
-
yes that seems to be ticked it says process hardware flights
-
It does sound like your drivers aren't installed, check the two pages below
http://www.airnavsystems.com/radarbox/help/hardware_connection.htm
http://www.airnavsystems.com/radarbox/help/installation.htm
-
it was working for a few mins now where it says network thats red i also dont have anything moving across gthe screen
-
If your in the UK it may be that the airspace is pretty quiet at the moment being late at night so you may not have much going on.
The network requires a subscription and can be bought from:
http://www.airnavsystems.com/RadarBox/order.html
-
the airspace is quiet busy i dont even have the airport names on my radar
-
If you click on the sign left of the sign with a 95 on it in the menu bar you can choose what you want displayed, such as the name of the airports or just the identifier.
Also advice us on what software you are using? Best to use the latest version, it also comes with a pdf manual which should help you indentify the main functions.
-
iam using airnav 2009 i clicked the sign with the 95 and still cant get airport names up or any planes across the screen
-
Download the Pro version from
http://www.airnavsystems.com/download/anrb/403/ANRB403Setup.exe
The airport signs is left of the 95 sign, not the 95 sign, It should give you options on not only airport signs.
Regarding your traffic, checking on the bottom left hand corner the the hardware is connected and is green and also you should see a number next to Msgs/Per second.
-
now theres lots of flights comming up at bottom it says 11 messages i still cant get the airport names up also can u change the style of the map from the radar1 to the one on bk of box
-
When you click on the aviation sign button (the arrow pointing down) if you go station labels you can then select station names/id/box.
To change the map colours, click on the button next to the right arrow in the menu. This will give you the choices of map colours.
As mentioned earlier, please have a quick read through of the manual, a lot of this is covered in the manual with pictures so its easy to follow.
-
ok thanx its working now just had a read through manual but still stuck on a few thing like it doesnt reconise robin hood airport and its not showing me any activity on the airport runway
-
ok thanx its working now just had a read through manual but still stuck on a few thing like it doesnt reconise robin hood airport and its not showing me any activity on the airport runway
Robin Hood (Doncaster) is not included in the suplied airports but can be added via download from Outlines. It's worth your while spending some time searching and reading through the forum for info and tips.
Your ability to monitor runway activity will depend of your position - remember that this is line of sight reception.