AirNav Systems Forum

AirNav RadarBox and RadarBox24.com => RadarBox.com FAQ => Topic started by: Azchuska on July 08, 2022, 11:39:43 AM

Title: Help setting up Flight Stick
Post by: Azchuska on July 08, 2022, 11:39:43 AM

Hi all, my first post apologies if I am posting in the wrong place and asking questions that have been asked many times before.

Is anybody able to point me in the right direction for setting up my Raspberry Pi to use the Flightstick?

I have attempted to look around the internet, so much information is old and out of date, the AirNav instructions are next to useless if you are a newbie. I have attempted to load a dump 1090 but have no idea if I used the correct dump (I don't even know if if it loaded, is it running). I have the flightstick and antenna, the Raspberry Pi is up and running Pi Hole with no problems.

Any help gratefully appreciated.

Title: Re: Help setting up Flight Stick
Post by: Runway 31 on July 08, 2022, 06:49:30 PM

See this thread https://forum.radarbox24.com/index.php?topic=10201.0

Alan

Title: Re: Help setting up Flight Stick
Post by: Runway 31 on July 12, 2022, 05:02:28 PM

These instructions relate solely to Raspberry Pi Linux, no Windows instructions included on the thread https://forum.radarbox24.com/index.php?topic=10201.0

Alan

Title: Re: Help setting up Flight Stick
Post by: Runway 31 on July 14, 2022, 04:12:38 PM

I know nothing about Linux

Can only suggest you read https://www.radarbox.com/sharing-data/guide and https://www.radarbox.com/sharing-data/claim

Alan