AirNav Systems Forum

AirNav RadarBox and RadarBox24.com => AirNav RadarBox and RadarBox24.com Discussion => Topic started by: Flying Fred on January 01, 2021, 02:44:30 PM

Title: Setting up a flight stick
Post by: Flying Fred on January 01, 2021, 02:44:30 PM

Hi all, this is my first post. I recently purchased a AirNav flight stick but the air nav software I downloaded and installed has a tour feature but it's not working. Where can I find instructions to set up my flight stick so I can monitor ads-b flights near me. I am running Windows 10 the latest version on a laptop. I do have a subscription to AirNav. Thanks.

Title: Re: Setting up a flight stick
Post by: Runway 31 on January 01, 2021, 03:04:34 PM

In addition to the software did you download and install the drivers?  Get the drivers here http://www.airnavsystems.com/Download/ANRB/Drivers/microRadarbox-Drivers-20150411.exe  Also make sure the antenna has a clear view if the sky

Tour has nothing to do with installation, it only goes down the flights you have on screen

You can see the flights you are picking on on the MyFlights tab

Alan

Title: Re: Setting up a flight stick
Post by: Flying Fred on January 01, 2021, 04:18:00 PM

Thanks for the quick reply. I will try your suggestions.

Title: Re: Setting up a flight stick
Post by: Flying Fred on January 01, 2021, 04:26:15 PM

How do I know that I am receiving data from an aircraft? The only tab I find is the Flights no My Flights tab.

Title: Re: Setting up a flight stick
Post by: Runway 31 on January 01, 2021, 04:54:21 PM

Yes the MyFlights tab should show what you are picking up.

At the bottome of the screen you should see a green square and Hardware Connected, if you donrt have the green square you are not connected

Alan