AirNav Systems Forum
AirNav RadarBox and RadarBox24.com => AirNav RadarBox and RadarBox24.com Discussion => Topic started by: Albatros on March 10, 2012, 10:44:03 AM
-
Hello, my name is Paolo and I live in Milan in Italy. I purchased a laptop with windows 7 and I have a 2009 version of airnavradarbox and I never had problems with the old computer with windows vista. When I starts the program I'm getting the Hardware: not connected the message and a red light, or, I get a windows that tells me: "ARNB.exe has stopped working and program quits". I also download the latest drivers by support and tried to install them but it's the same.
I'm forced to download the 3D version?
Can you help me?
Thank you in advance
P.S.:
Sorry for my bad english
Paolo
-
Paolo,
Save your existing Mylog file.
Download and install http://www.airnavsystems.com/download/anrb/403/ANRB403Setup.exe. This is the latest version and works in 2D or 3D if you take up that option. DO NOT INSTALL TO THE DEFAULT PROGRAM FILES LOCATION. Install to somewhere like c:Airnav to avoid problems from the windows virtual store
Download and install the 64bit drivers from http://www.airnavsystems.com/download/ANRB/drivers/ANRB64bitDrivers.zip
Replace the Mylog file with your previously saved version. Install the latest Navdata update http://www.airnavsystems.com/download/anrb/dbupdater/ANRBDBUpdater20120127.exe
Once you have done this connect the USB cable and start up Radarabox and all should be well
Dont worry about your English, its better than my Italian
Alan
-
Alan
Thank you very much for your explanation, the version is now 4.03 but still does not work, the system keeps telling me that the hardware is disconnected.
-
Paolo,
Go to Start, Devices and Printers, Airnav Radarabox, Hardware, Properties, Driver,Properties, Change settings, Update Driver, Browse my computer for driver software and direct your computer to wherever you have unzipped the 64bit drivers too.
Alan
-
Thank you very much Alan, now it works!
One last question: How do I know if update ANRBDBU 20120127 is up and running?
Thank you very much again
I invite you to visit our website www.airclipper.com
greetings
Paolo
-
Paolo,
Click on File, Database Explorer, select table aircraft and at bottom left it should tell you 136,*** rows loaded.
Alan
-
Yes Alan, at the bottom left I have 136150 rows loaded in 227 ms.
Thank you
Paolo
-
Glad to have been able to help Paulo, enjoy
Alan
-
Hello Alan, do you remember me and this tread, unfortunately I got a virus on the computer and I had to reset the computer, now I have to reinstall RadarBox, I have to perform the same operations that you've given me? I have installed the new updater New Navdata.db3 - 20120701 instead of 20120127? thanks a lot Paul
-
Glad you were able to do it again, well done
Alan
-
Sorry Alan, remember to me, the folder Airnav must be placed in c: and not in Program Files or Program Files (64bit). It 's so?
thank you very much
Paolo
-
Yes Paolo, its better in C:\Airnav to avoid Windows Virtual Store problems. Also remember the 64bit drivers http://www.airnavsystems.com/download/ANRB/drivers/ANRB64bitDrivers.zip if you havent already done so.
Alan