AirNav Systems Forum

AirNav Radar => AirNav Radar Discussion => Topic started by: vassylad on July 06, 2009, 09:59:13 PM

Title: I see nothing
Post by: vassylad on July 06, 2009, 09:59:13 PM

Hi guys I am seeing nothing whatsoever on my screen this evening no live or network traffic and both boxes are yellow at the bottom right hand side of the screen and the process hardware flights box is ticked.

TIA

Mike Vass

Title: Re: I see nothing
Post by: vassylad on July 06, 2009, 10:35:37 PM

Just adding on to previous post, when I open RB instead of the map and Aircraft/Airline etc opening up I get the activate alerts for network flights open up instead

Michael

Title: Re: I see nothing
Post by: Allocator on July 06, 2009, 10:49:57 PM

Quote from: vassylad on July 06, 2009, 09:59:13 PM

Hi guys I am seeing nothing whatsoever on my screen this evening no live or network traffic and both boxes are yellow at the bottom right hand side of the screen and the process hardware flights box is ticked.

TIA

Mike Vass

Have you tried shutting down your PC and restarting it?

I don't suppose that you have updated your Firewall software and prevented the software from communicating with your RadarBox - or have you plugged the USB lead into a different USB socket?

Two yellow 'lights' would indicate that the software can't 'see' your RadarBox.

What are the lights on you RadarBox doing?

Title: Re: I see nothing
Post by: vassylad on July 07, 2009, 05:25:29 AM

Hi I have unplugged everything, firewall is on but it always is, the only light that is on is the power light and nothing else, when I restart RB no lights flash which is worrying any ideas guys please..

Michael

Title: Re: I see nothing
Post by: EMA on July 07, 2009, 06:48:36 AM

Try replacing the usb cable.

If you plug the Airnav box in when the PC is on does it say new hardware found?

Title: Re: I see nothing
Post by: fatkat on July 07, 2009, 07:21:26 AM

also check your aerial  connections [if its got un hooked then your not likely to get any signals]

Title: Re: I see nothing
Post by: EMA on July 07, 2009, 08:03:48 AM

Check the centre connector on the aerial lead has not pushed back in to the cable.