AirNav Systems Forum

AirNav Radar => AirNav Radar Discussion => Topic started by: Phil-Robo on October 14, 2020, 11:48:35 AM

Title: Data Problem
Post by: Phil-Robo on October 14, 2020, 11:48:35 AM

I have aircraft on my screen but it says no data in the box in the bottom left hand corner, is my data getting through or not.

I'm using a Pi 2, if it helps.

Title: Re: Data Problem
Post by: markr468 on October 14, 2020, 05:18:54 PM

I think the problem is on their end, as mine looks similar but I still show aircraft like you do. I also checked some logs and everything looks fine.

Code: [Select]

sudo systemctl status rbfeeder

sudo tail -f /var/log/rbfeeder.log

Title: Re: Data Problem
Post by: Phil-Robo on October 14, 2020, 07:06:46 PM

Mark,

Thanks all seems to be fine now, i reinstalled everything.

I had aircraft on mine but no data was getting through, yours looks like data might not be getting through.

When all is working the lines should be green.

Title: Re: Data Problem
Post by: Runway 31 on October 14, 2020, 08:26:14 PM

There was an outage at the Airnav end in the early hours, nothing wrong at your end

Alan

Title: Re: Data Problem
Post by: EXTRPI004730 on October 15, 2020, 04:21:25 PM

I seem to be having the same trouble with connectivity; plane count is normal, RPI and peripherals fine, good LAN data, just not communicating well with RB24/Airnav server I guess. Been up and down. Hope they rectify the issue.
-G.

Title: Re: Data Problem
Post by: Runway 31 on October 15, 2020, 04:56:05 PM

Did you advise support there may be an issue

I note feeders are showing yellow for no data although aircraft are on screen

Alan

Title: Re: Data Problem
Post by: Runway 31 on October 15, 2020, 06:13:07 PM

Now fixed and the missing green time is to be restored

Alan