1. RB was working, but it's gone offline and, duh, no data. Can't figure out how to fix. I also have SkyAware and FlightRadar24 installed. Both are working.
2. When RB was working, my filter settings and map options were not retained. Is there some trick to retaining them?
What is your sharer ID and what receiver type do you have I presume a Pi
Regarding the filters I believe you require to set these each time but I believe the map you have set stays, maybe wrong on that though, maybe support can advise
Alan
ID 3662985
FlightAware receiver
I don't recognise that station ID its usually PGNRB**** for Radarbox receivers, EXTRPI***** for Pi's, EXTSHA**** for other receivers etc
Are you using the sharing software?
Alan
EXTRPi008602
Ah a Pi, hopefully abcd567 will notice your post, I know nothing about Pi's
Alan
Hi, do you know what software you are running your Pi on?
Dave.
Raspbian Buster
Please post output of following commands:
apt policy rbfeeder
sudo systemctl status rbfeeder
Please also post output of following command
(In the post, replace actual value of key by xxxx )
cat /etc/rbfeeder.ini
I copied the output into attached txt file. (When I tried to send reply with out pasted directly into message, it was bounced as "spam."
Thanks in advance for your help.
RBFeeder is installed, configured ok, but not working. Seems some file got corrupt.
Reinstall it, but first copy-paste key from file /etc/rbfeeder.ini in Notepad on your Windows/Mac computer.
Reinstall command:
sudo apt-get purge rbfeeder
sudo apt-get update
sudo apt-get install rbfeeder
sudo rbfeeder --setkey xxxxxx --no-start
## In above command replace xxxxx by your actual key
sudo systemctl restart rbfeeder
That did the trick.
Thank you---again, abcd567
Hi, I have a radarbox unit PGANRB114140 and for a few days I have not had access to real time network flights from the 6.02.003 software and since yesterday Its not sharing data with radarbox24 either.
Hi
I see that you are showing offline on Radarbox.com for 20hours. While you mention network flight, are you getting flight locally on MyFlights on your V6 software.
Alan
Yes I have flight locally and the sharing option active.
Suggest that you contact
[email protected]Alan
Morning, had the same for some time, not feeding RB24. Also was running an old software on the Pi so have taken the opportunity to sort that as well, and I wish I hadn`t!
Dave.
Cant help with that Dave, I know less than nothing about Pi's so contact support
Alan
New micro SD card ordered, be here this year. ;-)
No idea why I`m not feeding data through the box, nothing seems to have changed except my email which support know about.
Such is life, Dave.
Did you ask support?
Alan
Which port does the old radarbox use with the 6.02 software, I think my router is blocking the connection.
30003 or 30005 cant remember though but think it is 30003
Alan