AirNav Systems Forum
AirNav Radar => AirNav Radar Discussion => Topic started by: westiev8 on February 11, 2019, 12:51:58 PM
-
Hi All... when I put the mouse cursor over a plane in the map it just stays a cross and does not high light the aircraft, I'm on 6.02.003
with a microRB...thanks
-
I have not updated to V6.00.03 as it is solely to allow the X-RANGE receiver to work with the software, Delete your installation and install 6.00.02 http://www.airnavsystems.com/download/ANRB/ANRB60002Setup.exe and you will not have any issues
Alan
-
cheers ... works perfect
-
my next question... radar box flightstick with windows 7... the software will not start up with the flightstick connected?
-
No idea on why that should be the case, I just plugged it into the PC I am typing this reply on and its working fine and it is Windows 7
My Micro RB is usually plugged in but plugging in the flightstick saw Windows installing drivers for it so I had to install the Zadig drivers again
Alan
-
my next question... radar box flightstick with windows 7... the software will not start up with the flightstick connected?
You have to install rtl-sdr driver zadig
Is My DVB-T RTL SDR Dongle Healthy? (https://www.airnavsystems.com/forum/index.php?topic=16741.msg232321#msg232321)
Go to OPTION-1, and carry out "STEP 1 of 3" ONLY.
.
-
in the drop down menu it didn't list RTL2838 it came up with "bulk-in" which by removing the dongle said it was.....I've got it up and running now...thanks v much for the help.